Comparison At 44.1kHz

By Jean-Pierre Roche, published on February 23, 2004
Source: Tom's Guide US | Keywords: , ,

14. Comparison At 44.1kHz

Frequency response (40 Hz - 15 kHz) +0.07, -0.24 dB
Weighted signal-to-noise ratio 85.9 dB(A)
THD (Total Harmonic Distortion) 0.019 %
Stereo crosstalk 58 dB


Frequency response : Linearity is very good, especially for what our ears require.


Noise level : Noise itself is low, with just a few little artifacts.


Dynamic range : A very good result, as you'd expect from the noise result.


THD (Total Harmonic Distortion) : Distortion as such is very low with a very regular decreasing range.


IMD (Intermodulation distortion) : Measuring such high frequencies is not a feasible option at 44kHz.


Stereo crosstalk : Adequate in practice, but stereo crosstalkis behind other brands.

Comments | Print | Send to a friend

Sponsored links

Comments

Comments are closed on this page.

Sponsored links