12. The Disassembly Of The Nomad Jukebox, Continued
Now the upper cover is only held by two notches, which are in the area of the 'LOCK'-switch and opposite of it between the volume adjustment and the headphone jack. Hold the Jukebox upright, with the top part facing upwards. Use one hand to hold the bottom half of the housing and apply some pressure at the side-part of the top half of the housing right above where it says 'LOCK' with the other hand. If you are careful enough you will now be able to lift the top half of the housing. Don't worry if the button-unit slips out of the top half of the housing. You can easily put it back later. The same is valid for the 'LOCK'-switch cover.
Now you look at the topside of the player's PCB.
Previous
Next
12. The Disassembly Of The Noma...
- 1. Introduction
- 2. Consumer Electronic Audio Devices Adopt MP3 Only Slowly
- 3. The Nomad Jukebox, Continued
- 4. Headphones
- 5. USB Cable
- 6. Connectors
- 7. Display
- 8. The Specs
- 9. Functionality Of The Software
- 10. CD-Ripping
- 11. Uploading To The Nomad Jukebox
- 12. The Disassembly Of The Nomad Jukebox, Continued
- 13. The Disassembly Of The Nomad Jukebox, Continued
- 14. Preparing The New Hard Drive
- 15. Some Details Of The Jukebox Hard Drive