or frame) bursting" to provide throughput enhancement Super-G enhances the throughput of even a single AP / client pair (i.e. measured improvement doesn't depend on calculating the total throughput of multiple devices in a WLAN) Super-G uses packet-bursting,...

allows Direct Link to provide effective range (more accurately throughput vs. range) enhancement. Nitro XM's weakness is that a major portion of its throughput enhancement comes from the compressibility of the data being sent. GlobespanVirata made it clear...

• -Speed Limit 70Mbps
• -Broadcom's Afterburner

Generally, you can achieve some throughput enhancement even when mixing products from different vendors, as long as you mix products using the same enhancement technology. But products will fall back to standard 11g speeds if you try to mix Super-G and 125...

• -802.11n (Pre-N and MIMO)

technique called "frame bursting", but they both claim at least partial network throughput enhancement even if only APs employing either technology are used. We'll see later in the Performance section whether any of this actually boosts throughput. ...

1 (Figure 18) throughput of 20Mbps is almost 30% higher than the top speed of the ZyAIR G-2000 that I recently tested under identical conditions, a result probably helped by the Nitro-g throughput enhancement. Test Conditions: - WEP encryption: DISABLED...

the ability to disable 802.11b protection, I ran all the above tests in the WLA2's defaults of Auto mode and 11b protection disabled. - The WLA2's "Turbo" mode does not enable Broadcom's throughput enhancement Xpress technology, but just prevents clients that...

throughput test results in Figure 18 show best-case performance of 24Mbps, which is comparable to other 802.11g products running without any of the myriad throughput enhancement technologies. Figure 18: Four Condition Throughput test (click on the image...