36 Search results for throughput degradation
OK
Filters
Ad
  • relevance
  • date |
  • Sort by :
  • "Dual-ing" Standards - Reviews

    but I included the screenshot so that you can see the Max, Avg, and Min throughput numbers for each run. I also ran tests with 128bit WEP enabled, and didn't see any throughput degradation, at least none that I could separate out from the normally varying throughput....

  • How We Test 802.11a Wireless Products - Reviews

    Comparison plots that we think are indicative of the product's performance characteristics. Of course, higher throughput numbers are better. We also run this test with 128 bit WEP enabled for Condition #1 to see if there is any throughput degradation. 2) Response...

  • Wireless Security - Reviews

    but you'll need to read our review to see if we agree.. Next check was to see if enabling WEP caused any throughput degradation. I ran a Condition 1 (best case) test with 128 bit WEP enabled and disabled and found an decrease in average throughput of only...

  • Performance vs. Distance - Reviews

    at the farthest Condition 4 location. Finally, I ran a Condition 1 test with 128bit WEP enabled, and was glad to see no throughput degradation. 802.11g Wireless Performance Test Results Test Conditions - WEP encryption: DISABLED - Tx Rate: Automatic...

  • The Test - Reviews

    chipset turns in very acceptable performance in all modes, with 21Mbps average throughput and only about 8% worst-case throughput degradation when using WPA TKIP. WPA AES actually had throughput faster than the no-security case, but I chalk this up to normal...

  • How We Test 802.11b and 11g Wireless LAN Products [Older Reviews] - Reviews

    one minute is up. We report the average throughput calculated by the test. Of course, higher throughput numbers are better. We also run this test with 128 bit WEP enabled for Condition #1 to see if there is any throughput degradation. For devices supporting...

  • How We Test 802.11b and 11g Wireless LAN Products - Reviews

    loops until one minute is up. We report the average throughput calculated by the test. Of course, higher throughput numbers are better. We also run this test with 128 bit WEP enabled for Condition #1 to see if there is any throughput degradation. For devices...

  • Wireless Performance - Reviews

    test results (click on the image for a larger view) I also checked Location 1 performance with the GS5 and WPC54G card set to WEP128 mode. Figure 17 shows no measurable throughput degradation. Figure 17: Security mode throughput comparison (click on the...

  • Performance - Coax - Reviews

    tuned its OFDM signal processing magic to eke out higher throughput. But I suspect that the coax product's real advantage comes from less throughput degradation over distance, even though I couldn't effectively test that...yet! Instead I had to settle for simple...

  • D-Link AirPlus Enhanced 2.4 GHz Wireless Access Point Review - Reviews

    11/2002 Wireless Repeating function added in 2.20 firmware. See the related NTK. Pros • Web browser administration with lots of features • Multiple bridging modes • Good performance with no WEP enabled throughput degradation• Can...

Sponsored links