video in all of the available file formats and recording sources and it did not exceed an average of 45%. So over-taxing the CPU (Table 1) does not seem to be the cause of the pixilation. Figure 7: Example of image pixelation glitch (click to enlarge) Figure...

borderline watchable 0.25% watchable, with occasional glitches 0.1% watchable, with occasional glitches 0.05% watchable, with a few glitches Figure 12 shows a particularly nasty glitch encountered with a 0.05% packet loss. So even when the glitches...

appears in most tests and is caused by a periodic scan done as part of Broadcom's driver. Updated December 6, 2003 Broadcom says the periodic glitch is due to a scan done by WinXP's "Zero Configuration" utility, and not by Broadcom's driver. Figure 10 provides...

• -11g vs. 11g - Streaming and Max. Throughput

files as long as I didn't rely on the wireless connection on the Mvix. There was, unsurprisingly, no discernable performance difference between the two; both hammered through my Transport stream WMV-HD and HD DivX test files without a glitch or a hiccup. I...

the Matrox RT2500.. Since we have covered the digital video editing capabilities of the RT2500, I wanted to really focus on the capture quality. Capture quality was excellent in all situations and the RT2500 handled my torture-test tape with only one glitch....

is, but 100Mbps it's not! Just as I was posting this review, I checked prices and saw that the 5450 had leaped from a low of about $100 a few weeks ago to around $200! I hope this is just some sort of glitch in pricing, since it's about 60% higher than the...

Data sent from STA to AP Figures 1 and 2 show throughput and lost data plots, with the results showing no measurable interaction between the two wireless LANs. Note that the glitch in the throughput plot - according to Broadcom - is due to a scan done by WinXP's...

the web with Firefox after setting up my wireless SSID, WEP key and DHCP settings in the Configuration menu (explained below). Firefox has a minor comestic glitch that will show an error screen upon startup, but you can close it and continue surfing. ...

Figure 2. Figure 2: The Status Screen From there you may choose to run the "Setup Wizard" or manually configure the settings to your liking. In my case, one of the first things I had to do was upgrade the firmware, since initially there was a glitch in connecting...