a longer ping and see the setup in one try. Figure 25 shows what that looks like. Figure 25: Long ping from IPsec to LAN-side client At any rate, once you get a successful ping you should be up and running - at least when working from the WAN-side...

for an IP packet), 64-byte PING packets nevertheless provide a decent comparative measure for how fast or slow things are moving across the network between the sender and the target machine at any given moment. And of course, wide variation in PING times depending...

pretty close to the set rate. But the way the capped throughput is maintained is interesting. Figure 10: Rate control throughput characteristic Figure 10 shows a Chariot throughput plot that starts out without Rate Control, then kicks it in with a cap of 2048...

client, which is running the Qcheck endpoint. NOTE: Wireless Performance tests on a Wireless Router all take place on the LAN side of the router. They do not reflect any performance limitation due to the router part of the product. 1) Transfer Rate - More commonly...

The easiest way to speed up packet generation is for the Target WLAN to be a busy one. We can simulate this by running a continuous ping or starting a large file download on the Target. Keep airodump running on Auditor-A and notice the rate that the IV count...

4: Client on upper floor external porch, opposite end of residence, approximately 60 feet away, different branch circuit, different mains phase. Tests Run 1) Transfer Rate - More commonly known as Throughput, this test is a measure of how fast data moves between...

to the video stream in the same WLAN tests, with QoS features disabled. This could be due to the nature of UDP vs. TCP, but at any rate it's a plus for multimedia streaming. So to sum up, here are the key take-aways: You must have enough available bandwidth...

of the router. They do not reflect any performance limitation due to the router part of the product. • Tests are run with data sent from wireless client to Ethernet-LAN based test partner via a wireless access point. 1) Transfer Rate - More commonly known...

USB-based adapters, one Class 2 (an F8T003) and the other a Class 1 (a 100M range F8T001). Since even USB 1.1's 12Mbps max raw bit rate far exceeds Bluetooth's highest asynchronous raw data rate of 723 kbps, I didn't expect to see any difference in throughput....

VPN tunnel between the two test routers. We use the simple test setup pictured below to run three basic tests. 1) Transfer Rate - More commonly known as Throughput, this test is a measure of how fast data flows through the router. The test sends a file from...