inspiration, giving you an impression of the picture quality you can achieve.. After carefully removing the LCD panel, you can now start putting the actual projector together. Even during the initial test phases, the display must be firmly positioned where...

that everything looks nice and clean, if it doesn't you should start over at Step 3 with a fresh cut. Crimp the connector Put the jack into your crimping tool's RJ-45 slot and press down firmly. You won't hear a click or anything like that (unless...

skins and cases are available, but this isn't a player that really needs protecting. Remove the clear cap and you get a USB connection ready to plug straight into your computer. The cap snaps firmly back into place; if you put it on the wrong way, it still...

we had to take the two included metal bars and place them inside the corresponding holes in the wheel and in the shifter. While past Fanatec wheels haven’t had this problem, we found the metal bars very difficult to place in firmly, then far too hard to remove...

data ports behind a panel, as my Samsung does, it’ll be easier to remove the panel at this point. Next, slip the bracket onto the crossbar and tighten the bracket knob until the monitor is firmly clamped to the crossbar. Repeat the previous steps for your...

upon our first use. Despite many attempts to get the red “power” light to come on, it just wouldn’t indicate that it was getting juice. However, after removing the battery cover and making sure the battery was firmly in place, we got it to work consistently,...

still load slowly, but this now looks like a badly-chosen effect rather than a performance issue. You also need to learn to press more firmly than you expect on the touch screen (and HTC’s much better performance proves this is an issue with the TG01). This...