also removable. Figure 2: Front panel exposed (click image to enlarge) Figure 2 shows the screws removed from the drive cage and the cage pulled out slightly and Figure 3 shows the removed cage with a drive slid out so that you can get the idea....

the MX-1’s cooling ability; a quiet 60-mm squirrel cage fan beneath the drive moves lots of air almost inaudibly. A single screw secures the top panel to the housing, while two more screws secure a drive cage inside the case. The drive mounts onto the cage...

the drive swap, with step-by-step instructions: Look for the screws that hold the drive cage in place around the drive bay, then remove that screw. The photo shows the drive in the bay with the cage removed so you can see the screw aperture clearly at the...

the appropriate cables is not a problem. We recommend using SATA drives with angled cables to save a little more space. The HDD power cable is a bit on the short side. Another small fan hides below the HDD drive cage. Installing the hard disk proved quite...

So, you’ve got to safely remove the old drive first. The typical hard drive has plastic rails screwed into the side so that it can slide in and out from its cage inside the PC. Just unplug the drive’s cables, pinch the ends of the rails, and the drive should...

remove three screws at the bottom of the notebook. After this you can flip over the palm rest module with the touch pad. The HDD is located at the right hand side in a small metal cage. It is fixed with one screw and can then be moved to the right and exchanged....

eye-tracking system based on two cameras that precisely determine the position of the viewer's eyes and adjust the position of the lenticular screen plate as exactly as possible. This frees the user from the "cage" of the stereo zone, allowing greater freedom...