2: SD Wi-Fi in Dell 400MHz Axim X3 and HP H2210 (click on the image for a larger view) Figure 2 shows test results for AP to STA and STA to AP transfers with the SanDisk card inserted into the H2210 and X3. I used a NETGEAR ME102 Access Point (the same...

an Intel PXA263 clocked at 400 MHz) that I previously tested. Figure 4: Wireless throughput - AP to STA (downlink), SanDisk WiFi card in Axim X3 and X30 (click on image for a larger view) Figures 4 and 5 show that the X30 has approximately twice...

supporting a few area codes in major metro areas around the US, but will support all its normal codes when the product ships in October. Figure 4: Associating with an AP If you want to connect to a specific AP, or to set up particular Wi-Fi parameters, you'll...

click on image for a larger view) Figure 13 shows the results from tests using a Linksys WPC11v3 11b Client and Intersil 11b WPA Reference AP. The AP is the same design used by the Wi-Fi Alliance as part of its WPA certification test bed, and I used the WPA...

• -WPA in action - AP "Enterprise"
• -WPA in action - AP "SOHO"

second (or third) AP was more than most casual networkers were willing to deal with. So most either adjusted to their wireless LAN's actual, more limited range, or gave up in frustration and returned the equipment. The booming Wi-Fi market has reduced the price...

Figure 3: SanDisk Client Utility - Status The SanDisk client's AP browsing (Figure 4) is much better than Microsoft's (Figure 5), showing WEP status, advertised rates, channel and AP MAC addresses. Figure 4: SanDisk Client Utility - AP Browser Figure 5: Pocket...