available that improves dual-WAN load balancing features. - Nexland purchased by Symantec and pro800Turbo no longer available Pros • Dual 10/100 WAN ports with auto-failover and load balancing • Supports 16 WAN IP addresses • High throughput Cons...

• -Firewall, Port Mapping & Filters

Be aware that Proxy ARP only works where the WAN interface is configured with a static IP address or by DHCP. It also isn't required if extra IP addresses are routed to your WAN IP or are assigned to the WAN interface by PPPoE or PPTP. One final point to remember...

• -Basic m0n0wall Configuration

Static PPTP PPTP (static & dynamic)   Big Pond Big Pond Can release/renew WAN IP  PPTP (static & dynamic) Can release/renew WAN IP WAN MAC address clone   Can release/renew WAN IP WAN MAC address clone Can specify multiple alias IP addresses for static...

• -Features Table 1

MD5 & 3DES. Authentication method is Pre-shared key with matching key. For the "To" rule: Tunnel setting uses FWAG's WAN IP as specified address IP Filter list uses "My IP address" as Source, FWAG IP subnet as Destination addresses, mirrored For the "From"...

router would reach the server via the router's WAN IP address. "Loopback" is the ability for LAN-side users to reach a forwarded server via the router's WAN IP address (or assigned Domain Name if it has one and the proper DNS services are in place). This is...

the admin interface switches to port 8080, so that it doesn't interfere with forwarded web servers. So if the WAN IP of the router is 298.23.32.4, you'd enter into your Web browser from any WAN (Internet) side computer to access the...

access to a single IP address if you like. Tip: Remote admin is directed to Port 8080 (this is not documented). So if your WAN IP is 222.22.22.2, then you would enter into your browser to connect from the WAN side of the router. You...