100Mbps Ethernet.   Maximum Simultaneous Connections - This test measures the maximum number of connections or sessions that a router will concurrently support. It uses the IxChariot standard throughput.scr script with TCP/IP with the file_size parameter (the...

results are in no way effected by the router portion of the products. At each test location, the IxChariot Throughput.scr script (which is an adaptation of the Filesndl.scr long file send script) was run for 1 minute in real-time mode using TCP/IP in both uplink...

results are in no way effected by the router portion of the products. At each test location, the IxChariot Throughput.scr script (which is an adaptation of the Filesndl.scr long file send script) is run for 1 minute in real-time mode using TCP/IP in both uplink...

use Chariot to run longer transfer rate/throughput tests. We use the Throughput.scr script (which is an adaptation of the Filesndl.scr long file send script), but modify it to run two file transfers per timing record, instead of the default value of one per...

a network performs with large file transfers, and also the variation in throughput during an extended period of time.We use the Throughput.scr script (which is an adaptation of the Filesndl.scr long file send script) unmodified, and run the script for one minute...

would mix. I set up an IxChariot test using two pair of endpoints (Figure 17). Each pair ran a Throughput.scr script using TCP/IP, sending 200,000 Bytes of data at a time and looping for 1 minute in real-time mode. One version of the script started the Linksys...

test using two wireless clients (Figure 23). Each client ran a Throughput.scr script using TCP/IP, sending 200,000 Bytes of data at a time and looping for approximately 1 minute in real-time mode. One version of the script started the NETGEAR RangeMax client...

the best-case performance, and then connected them into my home's cable TV or phone wiring. I used IxChariot and ran TCP throughput and UDP streaming tests on both devices. Throughput was tested with IxChariot's throughput.scr script with the only change from...

I used the same five test locations around my home that I used for the HomePlug Turbo Roundup testing. Go here if you want the details on the locations and distances. I used Ixia's IxChariot and set up two copies of the standard throughput.scr script to run...

required by the content. Figures 6 and 7 illustrate the rule, showing IxChariot plots of a single wireless connection between the "Home" WRT54G and WPC54G client card. Figure 6 starts out with an IxChariot throughput.scr script running TCP with a file size...