64 Search results for tcp or udp
OK
Ad
  • relevance
  • date |
  • Sort by :
  • Features Table 1 - Reviews

    can be set to use one of 10 day / time schedule rules   TCP,UDP or both Triggered Port Forwarding 8 port ranges -10 ranges 19 port ranges   Both TCP/UDP (not selectable) TCP/UDP or both TCP or UDP selectable for ports and trigger Port Filtering 8 inbound...

    In this review
  • Routing Performance - Reviews

    really succeed to making wireless security a setup-and-go story? Read our review and find out for yourself!. Testing Notes: • All tests were run with Qcheck TCP and UDP ports opened from WAN to LAN client running Qcheck console The results show plenty...

  • Routing - Reviews

    on basic routers. It handles static, DHCP and PPPoE WAN types and includes WAN MAC cloning capability. You can also put a client in DMZ and set port forwarding for 20 port ranges (TCP, UDP or both protocols). But you'll find that firewall features are somewhat...

  • Online Gaming Results - Reviews

    with TOE cards in use (see Dell’s Boosting Data Transfer with TOE Technology or HP’s Using TCP/IP Offload Engine for some compelling evidence). With a smaller number of TCP and UDP ports open at any given moment on a gaming PC and lower overall network...

  • Table 1: WinPE and WinRE Commands and Programs - Reviews

    controlsnetshYesYesXAnother whole family of network service and function controlsnbtstatYesYesXDisplay statistics related to NetBIOS over TCP/IP traffic on the networknetstatYesYesXDisplay general TCP and UDP connections, port assignments, and activitiespathYesYesShow...

  • Routing Performance - Reviews

    its normal routing is fine, clocking in between 24 and 26Mbps. No complaints on response times and UDP streaming performance either. Testing Notes: • All tests were run with Qcheck TCP and UDP ports 10113 - 10117 set as Virtual Servers Routing Performance...

  • Firewall Features - Reviews

    you can specify TCP or UDP mapping, but not both, and can't redirect port ranges. The Open Ports feature handles mapping 10 port ranges to LAN-side clients, but you're still limited to specifying TCP or UDP as the protocol. Note that neither feature supports...

  • Firewall - Reviews

    for each day of the week. Figure 6 shows the screen for defining a custom service to block. You can choose UDP and TCP/UDP in addition to the TCP protocol shown. Figure 6: Blocked service setup You can exert finer control (than blocking all access with Block...

Sponsored links