Configuration tab of the Network Properties window. WinXP makes it harder to forget to clear any manual DNS settings that you may have, since it puts IP address, default gateway, and DNS settings in the same window. Fixing the problem is easy. Here's how...

service provider. Users with a static IP will need to enter the information for their DNS server and gateway, which is what the fourth menu option is for (Figures 16 and 17). Figure 16: Getting to DNS and Gateway settings Figure 17: Entering DNS and Gateway...

try to hand out DHCP leases to new computers as they are attached to the network and request IP address information. Normally, these requests would be answered by the campus DHCP server, which also hands out Gateway and DNS information - essential for proper...

who want to run servers and don't want to bother with using Dynamic DNS providers. It requires that you manually enter the IP, Gateway, and DNS address information that your ISP gives you. This choice is not always available, and if it is, you may have to pay...

due to the nature of PDA use, this trait could quickly exhaust the available number of leasable addresses on a busy LAN. You also have no way of seeing the Gateway and DNS server information for a DHCP connection, with the latter omission being a source of...

can reach you no matter what your IP address is. Static IP This is the method of choice for folks who want to run servers and don't want to bother with using Dynamic DNS providers. It requires that you manually enter the IP, Gateway, and DNS address information...

to connect back to the main AP, set your wireless client back to being a DHCP client and successfully get an IP address and proper Gateway and DNS information. If your WLAN doesn't use the 192.168.1.X subnet, leave the wireless client set to the static IP you've...

ISP EXTNM="255.255.255.0" #External netmask EXTGW="your.default.gw.ip" #External default gateway DNS="your.isps.dns.svr" #DNS server Quality Of Service In Astlinux, the author makes no attempt to provide a user interface...

step, which has you enter information that is specific to the type of connection you chose in Step 2. For Cable, you can enter Host Name and WAN Mac Address. Choosing "Fixed-IP xDSL" lets you enter IP address, Subnet mask, and Gateway and DNS server information....

from the SMC router in the 192.168.3.XXX subnet and was added to the the Network Connections window as shown in Figure 2 below. Figure 2 Tip: You must have the TCP/IP protocol installed, set to "Obtain an IP address automatically", and no Gateway or DNS information...