port that has the name DMZ / Internet. This is the port used for either the second cable modem (or DSL modem) or may be used as a public DMZ. The public DMZ is not the same thing as the DMZ private address. The DMZ / Internet port logically exists between the...

• -Firewall Controls

dial-up WAN support. Testing Notes: • WAN to LAN tests are all run with LAN endpoint in DMZ• LAN to WAN tests are run with LAN endpoint not in DMZ, except UDP Stream The truth be known, I've been having a hell of a time with my normal testing tool,...

Routing Performance. linksys etherfast cable. 4 port SPI-based router with two tunnel IPsec VPN endpoint. Has dedicated LAN DMZ port.. Testing Notes: • WAN to LAN tests are all run with LAN endpoint in DMZ• LAN to WAN tests are run with LAN endpoint...

test run as in Figure 6, but this time with DMZ enabled on the router with the LAN-WAN traffic. Figure 7: VPN throughput comparison - DMZ enabled (click on the image for a full-sized view) As expected, enabling DMZ knocked down the non-VPN throughput about...

• -Routing Performance

throughput across the dmz interface of the firewall was even slightly higher than what I recorded. The same netperf technique was used on the other system I tested (the one with the 10baseT card), but of course the machine specs are different. The dmz server...

through to the IP address that you specify. When a computer is placed in DMZ, however, it is for all intents and purposes, directly exposed to the Internet. So make sure that any computer placed in DMZ is running up-to-date antivirus software and has no...

true. By using the second router's DMZ (or exposed computer) function you can actually share in this direction, but for only one second router client at a time. All you need to do is put the IP address of the computer you want to share in DMZ, then use the...

it is necessary to, at minimum, open the ports that IxChariot uses through the router under test's firewall. However, we usually just put the IxChariot LAN-side machine in DMZ to save time. Note that since the router DMZ function is just a special case of port...