the throughput script with the default 1,000,000 Byte file size per timing record. Figure 9: STA to AP throughput - One STA - 5min. Figure 10: AP to STA throughput - One STA - 5 min. I started out letting the Emulation Engine use its automatic rate algorithm,...

• -The Tests - 32 STA Mixed Application
• -The Tests - 32 STA Throughput

Outdoor Throughput Comparison- AP to STA (click on the image for a larger view) Figure 33: 11g 200ft Outdoor Throughput Comparison- STA to AP (click on the image for a larger view) Figure 34: 11g 200ft Outdoor Throughput Comparison- AP to STA (click...

• -11b results - Outdoor
• -11b results - Indoor

Rate (Mbps) Response Time (msec) UDP stream Throughput (kbps) Lost data (%) STA to AP - Location 1 8.6 [No WEP] 8.6 [w/WEP] 1 (avg) 2 (max) 500 0 % STA to AP - Location 2 8.5 Not tested Not tested Not tested STA to AP - Location...

with Chariot sending date from AP to STA (client) with no boost and with both antennas replaced by BA24j's; then repeated the two tests with data flowing from STA to AP. Figure 11: AP to STA range test comparison - no and both boost (click on image to enlarge)...

other in the same room. I ran two sets of one minute IxChariot tests in both AP to STA (downlink) and STA to AP (uplink) directions, one with the client associated to the main AP (blue lightning bolt in Figure 5), the other with it associated to the WRE54G...

tracking down an unauthorized AP. The Start screen (Figure 1) shows two Access Points (AP). Tapping on the AP icon switches you to the AP List screen (Figure 2). I'm interested in the AP that has a client associated (indicated by the "+"), so just Tap-and-hold...