during my hunts was the omni-directional nature of the Compact Flash radio card that I was using. This limited my ability to exactly pinpoint the AP or STA that I was seeking. (In one particular hunt, I swore that the AP was inside a wall...) Figure 3: Find...

• -What It Is

like Figure 9. Figure 9: Misleading Survey Path Note that Surveyor has taken the three data points that were actually taken at the same location while I was hunting for my pen and distributed them evenly along a 20 foot path. This is obviously incorrect - the...

regular spectrum shown was generated by running IxChariot's throughput script continuously between a single wireless client and AP simultaneously in uplink and downlink directions. Figure 7: Nothin' but Channel 6 (click image to enlarge) The Real Time FFT...

during my experimentation. Figure 2 shows the result of the Wizard's hunt for WAP51ABs on my network. The wizard steps you through screens that allow you to: Manually set IP address, subnet and AP Name Set (E)SSID, and Channel for both 11a and 11b radios Enable...

Product Card FCC ID Belkin F5D7130 802.11g Wireless Network Access Point Broadcom BCM94306MP QDS-BRCM1005 Buffalo Tech WBR-G54 802.11g router Broadcom BCM94306MP QDS-BRCM1005 Buffalo Tech WLA2-G54 AP/Bridge Buffalo Tech WLI-MPCI-G54...

any either. The BSSID info can also be a little tricky to figure out. If the WET is set to Infrastructure mode to work with an Access Point or wireless router, the value will be the MAC address of the AP or router that the WET11 is connected to. If the WET11...

802.11a NTK for more info), such that there is little difference in range between standard, i.e. unenhanced 11a and 11b/g products. Consumers will need to hunt for 802.11a-only products, but there is little reason to do so. Dual-band products that cover all...