Tom's Guide > Forum > Home Cinema Equipment > MPEG DVB > FTA DVB Mpeg-2 Two Room Hook Up

FTA DVB Mpeg-2 Two Room Hook Up

Forum Home Cinema Equipment : MPEG DVB - FTA DVB Mpeg-2 Two Room Hook Up

TomsGuide.com: Over 800,000 questions and answers to address all your high-tech questions. Sign up now! Its free!
Word :    Username :           
 

I have two Traxis DBS1500 receivers that I bought from a ministry to watch FTA Galaxy 25 Prime Time Broadcasting's God's Learning Channel. I want to have one receiver in my bedroom and the other in the den.

They sold me a Twin KU LNBF and an Aspen MS3X4WB-P Multi Switch.

I understood the tech to say that I come off the LNB with the two coax lines into the multi switch. From the multi-switch I come off with two coax runs. One going to each receiver. Does that sound right?

I'm a little confused. The instructions that come with the DVB receivers is very sparse on facts and explanations. I noticed a connector on the back of the receivers marked "Loop-Out." The instructions said it is to go to another receiver.

Could someone clarify this for me? I'm not going to be hooking up a rotor. I just bought the setup for Gal 25 to watch the religious channels.

Thanks

Stephen

Sponsored Links
Register or log in to remove.

usad wrote :

I have two Traxis DBS1500 receivers that I bought from a ministry to watch FTA Galaxy 25 Prime Time Broadcasting's God's Learning Channel. I want to have one receiver in my bedroom and the other in the den.

They sold me a Twin KU LNBF and an Aspen MS3X4WB-P Multi Switch.

I understood the tech to say that I come off the LNB with the two coax lines into the multi switch. From the multi-switch I come off with two coax runs. One going to each receiver. Does that sound right?

I'm a little confused. The instructions that come with the DVB receivers is very sparse on facts and explanations. I noticed a connector on the back of the receivers marked "Loop-Out." The instructions said it is to go to another receiver.

Could someone clarify this for me? I'm not going to be hooking up a rotor. I just bought the setup for Gal 25 to watch the religious channels.

Thanks

Stephen



If you have a dual LNB then a multi-switch is not really needed. You just run one cable to each receiver striaght from the dual outputs of the LNB.

I bought my Traxis receiver from www.aeonsat.com

Those guys are very knowledgeable and might know more.


Reply to netherwalker
Tom's Guide > Forum > Home Cinema Equipment > MPEG DVB > FTA DVB Mpeg-2 Two Room Hook Up
Go to:

There are 11 identified and unidentified users. To see the list of identified users, Click here.

Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Google ads