Dram frquency and right timings for ddr3 ram

ok lets start with my system config
asus p5q3
intel q9550
ddr3 1333mhz ram
600watts psu

i oc my cpu from 2.83ghz to 3.4ghz
i have some doubts with my dram frequency and timings

oc settings
fsb frequency 400
dram frequency ddr3-961
dram timings 5-5-5-15
cpu voltage 1.23
fsb termination voltage 1.3
dram voltage 2.00
nb voltage 1.3


i am running now prime95 blend test

i'm at work now so i dont know if its still running (hope it stil run)


are my rams settings good enough to run with 3.4ghz processor?

or did i set my dram timings so tiny?

cause i am not an expert when it come overclocking

but hey, 12hours running prime95 blend with no errors seems like my settings are good..

so if my ram are too low,,then can u plz tell and explain to me what should i do?

I think what CJ was implying is you spent to much $$$ on the ram. Slower, and hence cheaper ram would have saved you money. There is little reason to buy DDR3 ram with a C2D/C2Q setup, the FSB is simply to slow. Cheaper DDR2 could have done what your doing.

Overall it looks ok to me, other then you spent to much.