Tom's Guide > Forum > General Networking > General Gateways, Routers and Firewalls > router not working

router not working

Forum General Networking : General Gateways, Routers and Firewalls - router not working

TomsGuide.com: Over 800,000 questions and answers to address all your high-tech questions. Sign up now! Its free!

Related content
News

See all topics related to "tomshardware"

Hi all I need help,

I got a computer connected straight from cable modem (com21) using usb,

and..

I got another three computer connected to router (Linksys) then from router connected to cable modem.

A few days ago my provider (cable TV) did maintenance to their network, since then three computer that connected through router can't access internet. Anyone can help me to fix it?

many thanks

Add a reply

More than likely, your cable company won't let more than one MAC address through from your modem at a time.

As an aside...I've never heard of someone using USB and ethernet on their cable modem at the same time, and having it work. If I were you, I'd put the PC you currently have hooked up via USB onto the router with the others. Unplug everything from the cable modem, wait for an hour or so, and then plug the router back into it. That should be enough time for the MAC filtering your cable company is doing to reset.

Reply to lotussama

Hi lotussama.

thanks for ur advice,
but actually before provider did maintenance everything is OK, a computer using usb (straight to cable modem) and at the same time another 3 computer hooked to router (router hooked to cable modem), connection to internet is good.So i got problem after provider maitenance, a computer with usb is good but not with another 3 computer.

Now i tried what u told, all computer hooked to router but it didnt help. does it mean i got problem with router? and buy a new one ? how to make sure that router still run well

many thanks

Reply to sewot

Power off the cable modem & router. Disconnect the USB cable from the cable modem and power on. Power on router and check the Internet connection on the 3 computers. Every cable mode I've ever seen will only provide 1 IP address unless you have static IPs.

Grumpy

Reply to Grumpy9117

There is one more option. Some ISP's don't like customers using routers and may even block mac address ranges designated to router manufacturers (it's rare, but there ar instances). If your router allows it, set it's MAC address to equal one of the PC NIC's plus 1. What I mean is if one PC has a mac of 0123.4567.89AB you set your routers public mac to 0123.4567.89AC. If they use mac address filtering that should solve your issue.

Reply to calyn

What is the "maintenance" they did?

Your ideal setup:

Cable modem hooks into the WAN port on your Router.
All 4 computers hook into the switch portion of your router (1-4/5).

Your cable modem will take 1-4 hours to pick up the new MAC address of your router.

Since you were using USB then swtiched to NIC in this instance, you might want to do this before you go to bed to give it time to kick in. Or you could call your cable company and tell them you switched from USB to a Network Card, at which time they'll manually reset their system to recognize your NIC over USB.

Discontinue use of the USB at that point.

Reply to Riser

Ask the community Add a reply

Tom's Guide > Forum > General Networking > General Gateways, Routers and Firewalls > router not working

Go to:

Help |
Forum rules

There are 11 identified and unidentified users. To see the list of identified users, Click here.

Page generated in 0.413 seconds

Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel

Google ads