Stuck on MOBO choice for new E4300 budget build

Based on reading a lot of recommendations online and shopping around for deals, I've purchased the following for a budget C2D build (my first computer build):

CPU: E4300 from Fry's a few weeks back (sold the bundled ECS mobo for $30)
RAM: 1GB (one stick) Kingston DDR2 667
HDD: Western Digital 250GB SATAII 16MB
PSU: Antec NeoHE 550W
alternate PSU*: Thermaltake 430W
CASE: Ultra Wizard Mid ATX
CPU FAN: Asus
CASE FAN: Scythe SFF21E 120mm

So far around $350, not bad, I was hoping for <$500 for everything.

I have an IDE hard drive I need to get some files from, but other than that no legacy components since my current aging desktop is about 8 years old!

I don't play games, it's always possible but I doubt that will change. I don't think I'm ready to play around with OC, just want to get this set up and running first! I'd like to at some point get into receiving OTA HDTV by adding a tuner card and maybe use this as a PVR... I have an older HDTV with component and VGA inputs. I'll use the PC for video, general internet and office use, photoshop (gimp actually) and the like. Quiet and stable is important, I've tried to select components accordingly.

I'm trying to get a cheap copy of XP from either my brother in law (former MS employee with friends still working there) or from a student.

That leaves me with the motherboard. I'm considering 945G chipset boards since I don't think I need a video card and this will keep the cost down. According to Antec and the internet in general, many 965 series MOBO's have trouble getting along with the PSU I selected, but 945 should be fine. *The alternate PSU could be used (that's why I put it in my bin o' parts) but I'd rather use the Antec due to quiet and high efficiency.

Is a 945G board a good choice for what I've described? If not, what would be a better choice? Thanks for the awesome forum!

EDIT: Yes I still need DVD drive as well. But that should be more straightforward to choose.

MSI 965 Neo-F. Very respectable, stable board at stock settings. Has all the components you need at a very affordable price. It won't overclock like some of the champ mobos, but sounds like that won't matter to you.

For a solid board at a good price, I'd really take a hard look at the Neo-F. The 945 board has an extra PCI slot so that might actually be better for you than the 965 in this instance:

945:
http://www.newegg.com/Product/Prod [...] 6813130059

965:
http://www.newegg.com/Product/Prod [...] 6813130052

I would look for a 945 board, they will have more IDE ports, although it sounds like can get by with 1 port (2 devices) for the old HD and a DVD. Did you buy the RAM yet? Some of the MB have a dual RAM setup where you get 2 sets of slots, one for DDR and the other for DDR2. If this is basically a dead end system, your next system will add a new MB-CPU then the other parts are fine.

OK, here's a compromise: 945P board (rather than G) and graphics card, does that sound better?

Gigabyte GA-945P-S3 motherboard

with

6600 LE Graphics Card with composite out
-or-
7300 GS Graphics Card with composite out

The first choice is OOS @newegg but maybe available from other vendors. These setups would be $50-$60 more than a 945G board but would offer more of course. Whaddya think? Thanks.