Archived from groups: microsoft.public.broadbandnet.hardware (More info?)

My wireless network suddenly decided to stop connecting to
the base station (several months after successful setup).
So I un-installed and reinstalled the broadband network
utility on both the base station and notebook adapter. I
had no problem re-installing and configuring the base
station, but when I went to set up the wireless network on
my laptop, it refuses the WEP key. I get an error message
saying that the network key is incorrect. I know the key
is correct...any suggestions?

Archived from groups: microsoft.public.broadbandnet.hardware (More info?)

Which version of Windows is the wireless client using?

Also to be 100% sure of the WEP key sign into http://192.168.2.1 to
check it.

Christy wrote:

> My wireless network suddenly decided to stop connecting to
> the base station (several months after successful setup).
> So I un-installed and reinstalled the broadband network
> utility on both the base station and notebook adapter. I
> had no problem re-installing and configuring the base
> station, but when I went to set up the wireless network on
> my laptop, it refuses the WEP key. I get an error message
> saying that the network key is incorrect. I know the key
> is correct...any suggestions?

--
Please do not contact me directly or ask me to contact you directly for
assistance.

If your question is worth asking, it's worth posting.

If it’s not worth posting you should have done a search on
http://www.google.com/ http://www.google.com/grphp?hl=en&tab=wg&q= or
http://news.google.com/froogle?hl=en&tab=nf&ned=us&q= before wasting our
time.

Archived from groups: microsoft.public.broadbandnet.hardware (More info?)

My base station is using Windows 2000, the wireless client
is on XP.

The taskbar shows that I have full signal strength and it
shows there are "packets" sent just none received.

I have checked, and rechecked the WEP key, even copied and
pasted it from the base unit to the wireless.

Any suggestions?

THANKS!
>-----Original Message-----
>Which version of Windows is the wireless client using?
>
>Also to be 100% sure of the WEP key sign into
http://192.168.2.1 to
>check it.
>
>Christy wrote:
>
>> My wireless network suddenly decided to stop connecting to
>> the base station (several months after successful setup).
>> So I un-installed and reinstalled the broadband network
>> utility on both the base station and notebook adapter. I
>> had no problem re-installing and configuring the base
>> station, but when I went to set up the wireless network on
>> my laptop, it refuses the WEP key. I get an error message
>> saying that the network key is incorrect. I know the key
>> is correct...any suggestions?
>
>--
>Please do not contact me directly or ask me to contact you
directly for
>assistance.
>
>If your question is worth asking, it's worth posting.
>
>If it's not worth posting you should have done a search on
>http://www.google.com/
http://www.google.com/grphp?hl=en&tab=wg&q= or
>http://news.google.com/froogle?hl=en&tab=nf&ned=us&q=
before wasting our
>time.
>.
>

Archived from groups: microsoft.public.broadbandnet.hardware (More info?)

Christy, it sounds like you haven't received the DHCP feed from the base
station. Go to the Command Prompt and type in "ipconfig" without the
quotes. If it returns a 169.x.x.x address, you're not receiving the feed.

You could try after that typing in "ipconfig /release" (again without
quotes) and then "ipconfig /renew" (no quotes) to kick it into gear. You
may need to restart your system. If it still doesn't receive the feed,
power down the base station for a couple minutes and then connect the power
again.
--
Chris H.
Microsoft Windows MVP/Tablet PC
Tablet Creations - http://nicecreations.us/
Associate Expert
Expert Zone - www.microsoft.com/windowsxp/expertzone


"Christy" <anonymous@discussions.microsoft.com> wrote in message
news:1f1201c4b780$edcbf480$a501280a@phx.gbl...
> My base station is using Windows 2000, the wireless client
> is on XP.
>
> The taskbar shows that I have full signal strength and it
> shows there are "packets" sent just none received.
>
> I have checked, and rechecked the WEP key, even copied and
> pasted it from the base unit to the wireless.
>
> Any suggestions?
>
> THANKS!
>>-----Original Message-----
>>Which version of Windows is the wireless client using?
>>
>>Also to be 100% sure of the WEP key sign into
> http://192.168.2.1 to
>>check it.
>>
>>Christy wrote:
>>
>>> My wireless network suddenly decided to stop connecting to
>>> the base station (several months after successful setup).
>>> So I un-installed and reinstalled the broadband network
>>> utility on both the base station and notebook adapter. I
>>> had no problem re-installing and configuring the base
>>> station, but when I went to set up the wireless network on
>>> my laptop, it refuses the WEP key. I get an error message
>>> saying that the network key is incorrect. I know the key
>>> is correct...any suggestions?
>>
>>--
>>Please do not contact me directly or ask me to contact you
> directly for
>>assistance.
>>
>>If your question is worth asking, it's worth posting.
>>
>>If it's not worth posting you should have done a search on
>>http://www.google.com/
> http://www.google.com/grphp?hl=en&tab=wg&q= or
>>http://news.google.com/froogle?hl=en&tab=nf&ned=us&q=
> before wasting our
>>time.
>>.
>>

Archived from groups: microsoft.public.broadbandnet.hardware (More info?)

Stop using the BNU on the wireless client as it is not needed on Windows
XP computers.

Christy wrote:

> My base station is using Windows 2000, the wireless client
> is on XP.
>
> The taskbar shows that I have full signal strength and it
> shows there are "packets" sent just none received.
>
> I have checked, and rechecked the WEP key, even copied and
> pasted it from the base unit to the wireless.
>
> Any suggestions?
>
> THANKS!
>

--
Please do not contact me directly or ask me to contact you directly for
assistance.

If your question is worth asking, it's worth posting.

If it’s not worth posting you should have done a search on
http://www.google.com/ http://www.google.com/grphp?hl=en&tab=wg&q= or
http://news.google.com/froogle?hl=en&tab=nf&ned=us&q= before wasting our
time.

Archived from groups: microsoft.public.broadbandnet.hardware (More info?)

Thanks for the suggestion...when I type in "ipconfig" it
returns the values:

Conection-specific DNS Suffix:
Autoconfiguration IP Address: 169.254.137.245
Subnet Mask: 25.25.0.0
Default Gateway:

When I type "ipconig/release" it returns the same vealues.
When I type "ipconfig/renew" it gives me an error message
saying,
"An error occurred while renewing interface Wireless
Network Connection: An operation was attempted on
something that is not a socket."

Where do I go from here?

THANKS!

-----original Message-----
>Christy, it sounds like you haven't received the DHCP feed
from the base
>station. Go to the Command Prompt and type in "ipconfig"
without the
>quotes. If it returns a 169.x.x.x address, you're not
receiving the feed.
>
>You could try after that typing in "ipconfig /release"
(again without
>quotes) and then "ipconfig /renew" (no quotes) to kick it
into gear. You
>may need to restart your system. If it still doesn't
receive the feed,
>power down the base station for a couple minutes and then
connect the power
>again.
>--
>Chris H.
>Microsoft Windows MVP/Tablet PC
>Tablet Creations - http://nicecreations.us/
>Associate Expert
>Expert Zone - www.microsoft.com/windowsxp/expertzone
>
>
>"Christy" <anonymous@discussions.microsoft.com> wrote in
message
>news:1f1201c4b780$edcbf480$a501280a@phx.gbl...
>> My base station is using Windows 2000, the wireless client
>> is on XP.
>>
>> The taskbar shows that I have full signal strength and it
>> shows there are "packets" sent just none received.
>>
>> I have checked, and rechecked the WEP key, even copied and
>> pasted it from the base unit to the wireless.
>>
>> Any suggestions?
>>
>> THANKS!
>>>-----Original Message-----
>>>Which version of Windows is the wireless client using?
>>>
>>>Also to be 100% sure of the WEP key sign into
>> http://192.168.2.1 to
>>>check it.
>>>
>>>Christy wrote:
>>>
>>>> My wireless network suddenly decided to stop connecting to
>>>> the base station (several months after successful setup).
>>>> So I un-installed and reinstalled the broadband network
>>>> utility on both the base station and notebook adapter. I
>>>> had no problem re-installing and configuring the base
>>>> station, but when I went to set up the wireless network on
>>>> my laptop, it refuses the WEP key. I get an error message
>>>> saying that the network key is incorrect. I know the key
>>>> is correct...any suggestions?
>>>
>>>--
>>>Please do not contact me directly or ask me to contact you
>> directly for
>>>assistance.
>>>
>>>If your question is worth asking, it's worth posting.
>>>
>>>If it's not worth posting you should have done a search on
>>>http://www.google.com/
>> http://www.google.com/grphp?hl=en&tab=wg&q= or
>>>http://news.google.com/froogle?hl=en&tab=nf&ned=us&q=
>> before wasting our
>>>time.
>>>.
>>>
>
>
>.
>

Archived from groups: microsoft.public.broadbandnet.hardware (More info?)

Your TCP/IP stack is hosed. You might try posting in a Windows
newsgroup unless someone knows how to reset the TCP/IP stack on Windows
XP over here.

Christy wrote:

> Thanks for the suggestion...when I type in "ipconfig" it
> returns the values:
>
> Conection-specific DNS Suffix:
> Autoconfiguration IP Address: 169.254.137.245
> Subnet Mask: 25.25.0.0
> Default Gateway:
>
> When I type "ipconig/release" it returns the same vealues.
> When I type "ipconfig/renew" it gives me an error message
> saying,
> "An error occurred while renewing interface Wireless
> Network Connection: An operation was attempted on
> something that is not a socket."
>
> Where do I go from here?
>
> THANKS!
>


--
Please do not contact me directly or ask me to contact you directly for
assistance.

If your question is worth asking, it's worth posting.

If it’s not worth posting you should have done a search on
http://www.google.com/ http://www.google.com/grphp?hl=en&tab=wg&q= or
http://news.google.com/froogle?hl=en&tab=nf&ned=us&q= before wasting our
time.

Archived from groups: microsoft.public.broadbandnet.hardware (More info?)

I did a search on the Microsoft KB & I Found the two following articles.

http://support.microsoft.com/?scid=811259

http://support.microsoft.com/?scid=817571

THey will give you directions on fixing this issue.

Christy wrote:

> Thanks for the suggestion...when I type in "ipconfig" it
> returns the values:
>
> Conection-specific DNS Suffix:
> Autoconfiguration IP Address: 169.254.137.245
> Subnet Mask: 25.25.0.0
> Default Gateway:
>
> When I type "ipconig/release" it returns the same vealues.
> When I type "ipconfig/renew" it gives me an error message
> saying,
> "An error occurred while renewing interface Wireless
> Network Connection: An operation was attempted on
> something that is not a socket."
>
> Where do I go from here?
>
> THANKS!
>
> -----original Message-----
>
>>Christy, it sounds like you haven't received the DHCP feed
>
> from the base
>
>>station. Go to the Command Prompt and type in "ipconfig"
>
> without the
>
>>quotes. If it returns a 169.x.x.x address, you're not
>
> receiving the feed.
>
>>You could try after that typing in "ipconfig /release"
>
> (again without
>
>>quotes) and then "ipconfig /renew" (no quotes) to kick it
>
> into gear. You
>
>>may need to restart your system. If it still doesn't
>
> receive the feed,
>
>>power down the base station for a couple minutes and then
>
> connect the power
>
>>again.
>>--
>>Chris H.
>>Microsoft Windows MVP/Tablet PC
>>Tablet Creations - http://nicecreations.us/
>>Associate Expert
>>Expert Zone - www.microsoft.com/windowsxp/expertzone
>>
>>
>>"Christy" <anonymous@discussions.microsoft.com> wrote in
>
> message
>
>>news:1f1201c4b780$edcbf480$a501280a@phx.gbl...
>>
>>>My base station is using Windows 2000, the wireless client
>>>is on XP.
>>>
>>>The taskbar shows that I have full signal strength and it
>>>shows there are "packets" sent just none received.
>>>
>>>I have checked, and rechecked the WEP key, even copied and
>>>pasted it from the base unit to the wireless.
>>>
>>>Any suggestions?
>>>
>>>THANKS!
>>>
>>>>-----Original Message-----
>>>>Which version of Windows is the wireless client using?
>>>>
>>>>Also to be 100% sure of the WEP key sign into
>>>
>>>http://192.168.2.1 to
>>>
>>>>check it.
>>>>
>>>>Christy wrote:
>>>>
>>>>
>>>>>My wireless network suddenly decided to stop connecting to
>>>>>the base station (several months after successful setup).
>>>>>So I un-installed and reinstalled the broadband network
>>>>>utility on both the base station and notebook adapter. I
>>>>>had no problem re-installing and configuring the base
>>>>>station, but when I went to set up the wireless network on
>>>>>my laptop, it refuses the WEP key. I get an error message
>>>>>saying that the network key is incorrect. I know the key
>>>>>is correct...any suggestions?
>>>>
>>>>--
>>>>Please do not contact me directly or ask me to contact you
>>>
>>>directly for
>>>
>>>>assistance.
>>>>
>>>>If your question is worth asking, it's worth posting.
>>>>
>>>>If it's not worth posting you should have done a search on
>>>>http://www.google.com/
>>>
>>>http://www.google.com/grphp?hl=en&tab=wg&q= or
>>>
>>>>http://news.google.com/froogle?hl=en&tab=nf&ned=us&q=
>>>
>>>before wasting our
>>>
>>>>time.
>>>>.
>>>>
>>
>>
>>.
>>

--
Please do not contact me directly or ask me to contact you directly for
assistance.

If your question is worth asking, it's worth posting.

If it’s not worth posting you should have done a search on
http://www.google.com/ http://www.google.com/grphp?hl=en&tab=wg&q= or
http://news.google.com/froogle?hl=en&tab=nf&ned=us&q= before wasting our
time.

Archived from groups: microsoft.public.broadbandnet.hardware (More info?)

THANK YOU! THANK YOU! THANK YOU! I followed the steps
outlined in the KB articles, reinstalling the TCP/IP and
it works again!

I appreciate all of your help!

>-----Original Message-----
>I did a search on the Microsoft KB & I Found the two
following articles.
>
>http://support.microsoft.com/?scid=811259
>
>http://support.microsoft.com/?scid=817571
>
>THey will give you directions on fixing this issue.
>
>Christy wrote:
>
>> Thanks for the suggestion...when I type in "ipconfig" it
>> returns the values:
>>
>> Conection-specific DNS Suffix:
>> Autoconfiguration IP Address: 169.254.137.245
>> Subnet Mask: 25.25.0.0
>> Default Gateway:
>>
>> When I type "ipconig/release" it returns the same
vealues.
>> When I type "ipconfig/renew" it gives me an error
message
>> saying,
>> "An error occurred while renewing interface Wireless
>> Network Connection: An operation was attempted on
>> something that is not a socket."
>>
>> Where do I go from here?
>>
>> THANKS!
>>
>> -----original Message-----
>>
>>>Christy, it sounds like you haven't received the DHCP
feed
>>
>> from the base
>>
>>>station. Go to the Command Prompt and type
in "ipconfig"
>>
>> without the
>>
>>>quotes. If it returns a 169.x.x.x address, you're not
>>
>> receiving the feed.
>>
>>>You could try after that typing in "ipconfig /release"
>>
>> (again without
>>
>>>quotes) and then "ipconfig /renew" (no quotes) to kick
it
>>
>> into gear. You
>>
>>>may need to restart your system. If it still doesn't
>>
>> receive the feed,
>>
>>>power down the base station for a couple minutes and
then
>>
>> connect the power
>>
>>>again.
>>>--
>>>Chris H.
>>>Microsoft Windows MVP/Tablet PC
>>>Tablet Creations - http://nicecreations.us/
>>>Associate Expert
>>>Expert Zone - www.microsoft.com/windowsxp/expertzone
>>>
>>>
>>>"Christy" <anonymous@discussions.microsoft.com> wrote in
>>
>> message
>>
>>>news:1f1201c4b780$edcbf480$a501280a@phx.gbl...
>>>
>>>>My base station is using Windows 2000, the wireless
client
>>>>is on XP.
>>>>
>>>>The taskbar shows that I have full signal strength and
it
>>>>shows there are "packets" sent just none received.
>>>>
>>>>I have checked, and rechecked the WEP key, even copied
and
>>>>pasted it from the base unit to the wireless.
>>>>
>>>>Any suggestions?
>>>>
>>>>THANKS!
>>>>
>>>>>-----Original Message-----
>>>>>Which version of Windows is the wireless client using?
>>>>>
>>>>>Also to be 100% sure of the WEP key sign into
>>>>
>>>>http://192.168.2.1 to
>>>>
>>>>>check it.
>>>>>
>>>>>Christy wrote:
>>>>>
>>>>>
>>>>>>My wireless network suddenly decided to stop
connecting to
>>>>>>the base station (several months after successful
setup).
>>>>>>So I un-installed and reinstalled the broadband
network
>>>>>>utility on both the base station and notebook
adapter. I
>>>>>>had no problem re-installing and configuring the base
>>>>>>station, but when I went to set up the wireless
network on
>>>>>>my laptop, it refuses the WEP key. I get an error
message
>>>>>>saying that the network key is incorrect. I know
the key
>>>>>>is correct...any suggestions?
>>>>>
>>>>>--
>>>>>Please do not contact me directly or ask me to
contact you
>>>>
>>>>directly for
>>>>
>>>>>assistance.
>>>>>
>>>>>If your question is worth asking, it's worth posting.
>>>>>
>>>>>If it's not worth posting you should have done a
search on
>>>>>http://www.google.com/
>>>>
>>>>http://www.google.com/grphp?hl=en&tab=wg&q= or
>>>>
>>>>>http://news.google.com/froogle?hl=en&tab=nf&ned=us&q=
>>>>
>>>>before wasting our
>>>>
>>>>>time.
>>>>>.
>>>>>
>>>
>>>
>>>.
>>>
>
>--
>Please do not contact me directly or ask me to contact
you directly for
>assistance.
>
>If your question is worth asking, it's worth posting.
>
>If it's not worth posting you should have done a search
on
>http://www.google.com/ http://www.google.com/grphp?
hl=en&tab=wg&q= or
>http://news.google.com/froogle?hl=en&tab=nf&ned=us&q=
before wasting our
>time.
>.
>

Archived from groups: microsoft.public.broadbandnet.hardware (More info?)

Christy wrote:

> My wireless network suddenly decided to stop connecting to
> the base station (several months after successful setup).
> So I un-installed and reinstalled the broadband network
> utility on both the base station and notebook adapter. I
> had no problem re-installing and configuring the base
> station, but when I went to set up the wireless network on
> my laptop, it refuses the WEP key. I get an error message
> saying that the network key is incorrect. I know the key
> is correct...any suggestions?
This happened to me too. I think an interloper has got into your system,
but MS says Im crazy. But what else can it be. I go to set my time on
MSBN and it will be on a dif time zone everytime. Also my weps dont work
either.

Archived from groups: microsoft.public.broadbandnet.hardware (More info?)

Did you not see that we fixed her issue. It was the fact that her
TCP/IP stack was hosed. Also I think Microsoft is right in calling you
a lunatic.

ElKabong wrote:
> This happened to me too. I think an interloper has got into your system,
> but MS says Im crazy. But what else can it be. I go to set my time on
> MSBN and it will be on a dif time zone everytime. Also my weps dont work
> either.

--
Please do not contact me directly or ask me to contact you directly for
assistance.

If your question is worth asking, it's worth posting.

If it’s not worth posting you should have done a search on
http://www.google.com/ http://www.google.com/grphp?hl=en&tab=wg&q= or
http://news.google.com/froogle?hl=en&tab=nf&ned=us&q= before wasting our
time.