Ads
Tom's Guide > Forum > Home Theater > HDTV > With component video cables screen is all red

With component video cables screen is all red

Forum Home Theater : HDTV With component video cables screen is all red

Related Content
You have searched for "With component video cables screen is all red" . You might be interested in the following threads:

See more for "With component video cables screen is all red"

Can't find your answer?
Ask!
Word :    Username :           
 
dovbell   02-20-2011 at 08:10:08 AM

Hello,
I connected my new DVD to my LCD TV using component cable:
Red--> Red
Green --> Green
Blue --> Blue
The screen displays only the red color. With Composite yellow RCA all the colors are there. What's the bug?

Message quoted 1 times
Reply to dovbell
Register or log in to remove.
TheViper   02-25-2011 at 06:51:50 AM

Never heard of this one before. I'd suggest first trying a different set of component cables. Have you used those same cables on any other TV before without problem?

Reply to TheViper
dovbell   03-07-2011 at 09:25:14 AM

Here is the solution: The DVD remote has a video button.
1. The DVD player must be empty of DVD/Disk.
2. On the TV set select yPbPr option view mode.
3. On DVD remote, click several time on video button until the image shows YPbPr selection from the DVD , then the screen should correctly display. ( this way you will control which output is chosen among the available ones: SCART, Composit, HDMI, component...).

Reply to dovbell
mrtired   03-12-2011 at 06:07:23 AM

Look for a toggle switch on the back of the player to switch between video output types. If there is no physical switch, there will be one in the Setup menu for the player.

Reply to mrtired
Mark_69   03-15-2011 at 01:10:03 PM

i think you neeed a new pair of cables. Good luck.

Message quoted 1 times
------------------------------ http://www.cheapsamsungled.com/
 Reply to Mark_69
dovbell   03-22-2011 at 08:22:22 AM

Mark_69 wrote :

i think you neeed a new pair of cables. Good luck.


No this not the problem, I already gave the solution:

The DVD remote has a video button.
1. The DVD player must be empty of DVD/Disk.
2. On the TV set select yPbPr option view mode.
3. On DVD remote, click several time on video button until the image shows YPbPr selection from the DVD , then the screen should correctly display. ( this way you will control which output is chosen among the available ones: SCART, Composit, HDMI, component...).


Reply to dovbell
angeljaz   02-10-2012 at 11:54:36 PM

dovbell wrote :

Hello,
I connected my new DVD to my LCD TV using component cable:
Red--> Red
Green --> Green
Blue --> Blue
The screen displays only the red color. With Composite yellow RCA all the colors are there. What's the bug?


Hi Go into DVD setting menu on dvd and change output from s video to component out. This should fix red colour when using component cables

Reply to angeljaz
Ask the community Add a reply
TomsGuide.com: Over 800,000 questions and answers to address all your high-tech questions. Sign up now! Its free!
See all topics related to "With component video cables screen is all red"
Tom's Guide > Forum > Home Theater > HDTV > With component video cables screen is all red
Go to:

There are 50 identified and unidentified users. To see the list of identified users, Click here.

Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 0.528 seconds
Tom's Guide around the World