Ads
Tom's Guide > Forum > Systems > Packard Bell > Rc410-m2 not booting or beeping

Rc410-m2 not booting or beeping

Forum Systems : Packard Bell Rc410-m2 not booting or beeping

Word :    Username :           
 

Hello,
I Have a problem guys this is the case:
first I did a bios flashing on my PC packard bell Istart mc 5417 with mobo name rc410-m v 2.0, I get the flash program from packard bell site and I created a cd with that program then I started the bios flashing when I proceed every thing is fine till the end the pc ask for restart and freeze I press ctrl+alt + suppr to reboot there the pc aint work again no signal from the mobo no beeping and black screen.

I try an other bios but nothing at all the power is ok on the mobo but nothing on screen the graphic card work on an other system even ram and processor but in mine nothing. I do not know what is the problem? Please tell me what to do any help peaple? please answer and whit many thk's best regards from osg-tn

Register or log in to remove.

If the BIOS flash went bad, the only fix is to replace the chip or the motherboard. Motherboard will probably be easier and maybe cheaper.

Reply to hang-the-9
- 0 +

u mean the mobo is dead?

Reply to ogarci

ogarci wrote :

u mean the mobo is dead?



Yes, sounds like the BIOS flash got messed up, which kills the system. You can see if the BIOS chip is available separately from the motherboard, ebay or from Packard Bell.

Reply to hang-the-9
TomsGuide.com: Over 800,000 questions and answers to address all your high-tech questions. Sign up now! Its free!
Tom's Guide > Forum > Systems > Packard Bell > Rc410-m2 not booting or beeping
Go to:

There are 41 identified and unidentified users. To see the list of identified users, Click here.

Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Tom's Guide around the World