Unlocking Siemens S56 ??

Archived from groups: alt.cellular.attws,alt.cellular.bluetooth (More info?)

Thank you for the info. I was hoping to do this myself if I could
overcome the obstacles mentioned in my original post. By the way I
tried to access www.cellltd.net several times w/o success. Do they
unlock for a fee too?


On Fri, 18 Jun 2004 23:54:40 +0200, "Joseph Higgins"
<Chilli2050@freenet.de> wrote:

>Hello go this website:
>
>http://www.globalunlock.com/
>
>Try going to www.cellltd.net
>"wKoboldw" <dontspam.res1d89o@verizon.net> wrote in message
>news:eeu5d05eek100el6jjo7enm24p31po8tfm@4ax.com...
>> I recently purchased an S56 from a cingular customer. I'm trying to
>> unlock it using FREIA v10 to use w/my ATTWS service.
>>
>> I'm having no success getting the program to read the phone @ all. I
>> have a serial cable and a usb cable w/proper drivers. Both cables work
>> when I use the Siemens S56 Suite.
>>
>> The program's messages are: "boot code does not seem to be running" &
>> "phone does not power on" etc.
>>
>> Any help will be greatly appreciated
>

Archived from groups: alt.cellular.attws,alt.cellular.bluetooth (More info?)

Thanks so much for this info. I just want to say I had spent hours reading
Forums, posts etc, saying that it was the cable I had. After 45 seconds of
reading your posts , particularly the Power Button instructions, Im
unlocking S56s that have been sitting in a box awaiting unlocking.
Thanks alot.
Now, can you tell me the special Anderson trick for the SL56?
Nobody seems to have that one under control yet.
Thanks again


"B Anderson" <anderson101@email.com> wrote in message
news:2mvbd0hoimk3o3r10dptoludlihbjujif7@4ax.com...
> Are you using a Siemens name brand cable? If so, this may be your
> problem as it takes a generic cable to unlock a phone. Siemens did
> something to prevent unlocking in their cables, but it does all the
> data exchange stuff without problems.
>
> After you get the message you wrote (which is normal), you need to
> press the power button quickly, but not holding it to turn on the
> phone. Make sure you select "direct unlock no map is saved" and press
> the button marked "use original imei". The software will then "see"
> the phone and unlock it.
>
> When you see the last line that says "OK" you're done, and unlocked.
>
> The log window reports the following stuff (when I unlocked a M56
> yesterday), your s56 will look a lot like this:
>
> COMM_LoadBoots : selected phone family is 10
> TTY_OpenCOMPort : opening COM1
> COMM_IsBootRunning : bootcode does not seem to be running
> COMM_LoadBoots : Waiting to power on the phone ...
>
> <it waits for you to press the power button>
>
> COMM_LoadBoots : phone is powered on
> COMM_LoadBoots : internal loader version is 01.00
> COMM_LoadBoots : EEPROM IMEI is **************
> COMM_LoadBoots : original IMEI is *************** (locked)
> COMM_LoadBoots : found SIEMENS M56 lg95 v4 (1)
> COMM_LoadBoots : flash ids are 00012212 [00000000] - 1201
> COMM_LoadBoots : phone ids are 7B****** [7B*******]
> O.K.
>
> Yes, I took out my imei and replaced it with *'s, don't want someone
> cloning my phone.
>
> On Sat, 19 Jun 2004 04:44:14 GMT, wKoboldw
> <dontspam.res1d89o@verizon.net> wrote:
>
> >Thank you for the info. I was hoping to do this myself if I could
> >overcome the obstacles mentioned in my original post. By the way I
> >tried to access www.cellltd.net several times w/o success. Do they
> >unlock for a fee too?
> >
> >
> >On Fri, 18 Jun 2004 23:54:40 +0200, "Joseph Higgins"
> ><Chilli2050@freenet.de> wrote:
> >
> >>Hello go this website:
> >>
> >>http://www.globalunlock.com/
> >>
> >>Try going to www.cellltd.net
> >>"wKoboldw" <dontspam.res1d89o@verizon.net> wrote in message
> >>news:eeu5d05eek100el6jjo7enm24p31po8tfm@4ax.com...
> >>> I recently purchased an S56 from a cingular customer. I'm trying to
> >>> unlock it using FREIA v10 to use w/my ATTWS service.
> >>>
> >>> I'm having no success getting the program to read the phone @ all. I
> >>> have a serial cable and a usb cable w/proper drivers. Both cables work
> >>> when I use the Siemens S56 Suite.
> >>>
> >>> The program's messages are: "boot code does not seem to be running" &
> >>> "phone does not power on" etc.
> >>>
> >>> Any help will be greatly appreciated
> >>
>

Archived from groups: alt.cellular.bluetooth (More info?)

Use the Griffin ALL_Siemens program available at Unlocker Forums.

Set to "new phone" and use the "s55" selection.

http://www.unlocker-forums.co.uk/


--
earlgrey_44
brought to you by http://www.wifi-forum.com/