Ads
Tom's Guide > Forum > Storage > SSD > [Solved] AHCI Mode

[Solved] AHCI Mode

Forum Storage : SSD [Solved] AHCI Mode

Related Content
You have searched for " [Solved] AHCI Mode" . You might be interested in the following threads:

See more for " [Solved] AHCI Mode"

Can't find your answer?
Ask!

Best answer from JohnnyLucky.

Word :    Username :           
 
gregcky   01-27-2012 at 05:28:19 AM

I have an 80g sata II intel SSD. I just installed some new hardware (mobo/cpu/gpu etc) and on my first bootup it gave me a (Y/N) question prompt right before the windows login screen. It has something to do with AHCI mode. I'm not entirely sure what i had my old mobo set to before, but any help with this? I assume one of the settings would increase performance or something like that.

Reply to gregcky
Register or log in to remove.
hugostiglitz   01-27-2012 at 05:39:45 AM

AHCI should definatly be enabled.

if you have replaced your MOBO then you should DEFINATLY reinstall windows. windows does not take to large hardware changes well.

------------------------------ 2700K @ 4.5 | Maximus IV Extreme-Z | 16gb RipjawX DDR3 1866mhz | 2x 2GB 5870's | Eyefinity @ 5760*1080 | 2x WD Black 1TB Raid 0 | EK&XSPC Water Cooled | Thermaltake 1200w PSU | Thermaltake Tai-Chi Case
No liability accepted or warranty given for advice
 Reply to hugostiglitz
gregcky   01-27-2012 at 06:15:40 AM

ok that didn't work well at all LOL. I set it to AHCI and i couldn't boot at all, it wanted to repair..had to go into bios and switch it back to IDE. Care to explain what the difference between the two is?

Also to answer your comment, when i booted up it just asked to re-verify windows. Everything works fine.

Reply to gregcky
jdelamater99   02-05-2012 at 04:21:27 AM

You have to set AHCI mode before installing the OS. if you want to switch it after installing the OS, you have to manually edit the registry, reboot, and then switch to AHCI.

Reply to jdelamater99
r0ck3tm@n   02-05-2012 at 05:09:39 AM

Just get it running then look up the article on the Microsoft web site that tells you how to switch to AHCI mode. You merely have to change one registry data item which then tells Windows to use the AHCI driver during the next boot.

------------------------------ >=====>Stephen
 Reply to r0ck3tm@n
JohnnyLucky   02-05-2012 at 08:34:39 PM
Best answer

Here are the official Microsoft Windows 7 instructions explaining how enable AHCI mode in the Windows registry:

http://www.sevenforums.com/tutoria [...] html?ltr=A

Reply to JohnnyLucky
Ask the community Add a reply
TomsGuide.com: Over 800,000 questions and answers to address all your high-tech questions. Sign up now! Its free!
Tom's Guide > Forum > Storage > SSD > [Solved] AHCI Mode
Go to:

There are 45 identified and unidentified users. To see the list of identified users, Click here.

Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 0.276 seconds
Tom's Guide around the World