Archived from groups: microsoft.public.windows.networking.wireless (More info?)

I use Remote Desktop connection regularly between my home computer and my
laptop at work. I have linksys cable modem with a linksys router. I have
setup the port settings with the router to get past the firewall and also
configured my software firewalls. Connection has been good until I installed
a print server to my system. Now my Remote Desktop connection no longer
works. Any ideas?

Archived from groups: microsoft.public.windows.networking.wireless (More info?)

No ones had this problem huh?

"ME Johnson" <mjohnsonjr@comcast.net> wrote in message
newsZ6KUigiFHA.2472@TK2MSFTNGP15.phx.gbl...
>I use Remote Desktop connection regularly between my home computer and my
>laptop at work. I have linksys cable modem with a linksys router. I have
>setup the port settings with the router to get past the firewall and also
>configured my software firewalls. Connection has been good until I
>installed a print server to my system. Now my Remote Desktop connection no
>longer works. Any ideas?
>
>
>
>

Archived from groups: microsoft.public.windows.networking.wireless (More info?)

No, I certainly haven't had the problem.

The only thing I could think of that would allow a print server to mess with
you configuration might be and address change to accommodate the new device.
I also don't know what port it might use, but I suppose there may be one in
common.

Clark

"ME Johnson" <mjohnsonjr@comcast.net> wrote in message
news:eR$IBYLjFHA.1948@TK2MSFTNGP12.phx.gbl...
>
> No ones had this problem huh?
>
> "ME Johnson" <mjohnsonjr@comcast.net> wrote in message
> newsZ6KUigiFHA.2472@TK2MSFTNGP15.phx.gbl...
>>I use Remote Desktop connection regularly between my home computer and my
>>laptop at work. I have linksys cable modem with a linksys router. I have
>>setup the port settings with the router to get past the firewall and also
>>configured my software firewalls. Connection has been good until I
>>installed a print server to my system. Now my Remote Desktop connection no
>>longer works. Any ideas?
>>
>>
>>
>>
>
>

Archived from groups: microsoft.public.windows.networking.wireless (More info?)

I'll bet thats it. I had to assign an IP for it to work and need to set the
router for that IP also
"Clark" <who@whoknows.com> wrote in message
news:%zrDe.870$Ok6.608@newssvr29.news.prodigy.net...
> No, I certainly haven't had the problem.
>
> The only thing I could think of that would allow a print server to mess
> with you configuration might be and address change to accommodate the new
> device. I also don't know what port it might use, but I suppose there may
> be one in common.
>
> Clark
>
> "ME Johnson" <mjohnsonjr@comcast.net> wrote in message
> news:eR$IBYLjFHA.1948@TK2MSFTNGP12.phx.gbl...
>>
>> No ones had this problem huh?
>>
>> "ME Johnson" <mjohnsonjr@comcast.net> wrote in message
>> newsZ6KUigiFHA.2472@TK2MSFTNGP15.phx.gbl...
>>>I use Remote Desktop connection regularly between my home computer and my
>>>laptop at work. I have linksys cable modem with a linksys router. I have
>>>setup the port settings with the router to get past the firewall and also
>>>configured my software firewalls. Connection has been good until I
>>>installed a print server to my system. Now my Remote Desktop connection
>>>no longer works. Any ideas?
>>>
>>>
>>>
>>>
>>
>>
>
>

Archived from groups: microsoft.public.windows.networking.wireless (More info?)

Nope, didn't work. The only other thing I did was put a wireless Mouse and
Keyboard on the system...

"ME Johnson" <mjohnsonjr@comcast.net> wrote in message
news:%23qudMfXjFHA.2156@TK2MSFTNGP14.phx.gbl...
> I'll bet thats it. I had to assign an IP for it to work and need to set
> the router for that IP also
> "Clark" <who@whoknows.com> wrote in message
> news:%zrDe.870$Ok6.608@newssvr29.news.prodigy.net...
>> No, I certainly haven't had the problem.
>>
>> The only thing I could think of that would allow a print server to mess
>> with you configuration might be and address change to accommodate the new
>> device. I also don't know what port it might use, but I suppose there may
>> be one in common.
>>
>> Clark
>>
>> "ME Johnson" <mjohnsonjr@comcast.net> wrote in message
>> news:eR$IBYLjFHA.1948@TK2MSFTNGP12.phx.gbl...
>>>
>>> No ones had this problem huh?
>>>
>>> "ME Johnson" <mjohnsonjr@comcast.net> wrote in message
>>> newsZ6KUigiFHA.2472@TK2MSFTNGP15.phx.gbl...
>>>>I use Remote Desktop connection regularly between my home computer and
>>>>my laptop at work. I have linksys cable modem with a linksys router. I
>>>>have setup the port settings with the router to get past the firewall
>>>>and also configured my software firewalls. Connection has been good
>>>>until I installed a print server to my system. Now my Remote Desktop
>>>>connection no longer works. Any ideas?
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>

Archived from groups: microsoft.public.windows.networking.wireless (More info?)

ME Johnson wrote:

> Nope, didn't work. The only other thing I did was put a wireless Mouse
> and Keyboard on the system...
>
Then take them off and see if that makes a difference. Could be
interference.

Malke
--
MS-MVP Windows User/Shell
Elephant Boy Computers
www.elephantboycomputers.com
"Don't Panic"

Archived from groups: microsoft.public.windows.networking.wireless (More info?)

That did not correct it....Would the print server and router being close to
each other matter? I can connect with a NAT IP when the computers are in the
same room but it will not connect to the true IP which I find on
whatismyip.com



"Malke" <notreally@invalid.com> wrote in message
news:%23Sw2CKajFHA.3348@tk2msftngp13.phx.gbl...
> ME Johnson wrote:
>
>> Nope, didn't work. The only other thing I did was put a wireless Mouse
>> and Keyboard on the system...
>>
> Then take them off and see if that makes a difference. Could be
> interference.
>
> Malke
> --
> MS-MVP Windows User/Shell
> Elephant Boy Computers
> www.elephantboycomputers.com
> "Don't Panic"

Archived from groups: microsoft.public.windows.networking.wireless (More info?)

ME Johnson wrote:

> That did not correct it....Would the print server and router being
> close to each other matter? I can connect with a NAT IP when the
> computers are in the same room but it will not connect to the true IP
> which I find on whatismyip.com
>

Check your DNS settings.

Mlake
--
Elephant Boy Computers
www.elephantboycomputers.com
"Don't Panic!"
MS-MVP Windows - Shell/User

Archived from groups: microsoft.public.windows.networking.wireless (More info?)

"Malke" <invalid@not-real.com> wrote in message
news:e%23y72LsjFHA.3568@TK2MSFTNGP10.phx.gbl...
> ME Johnson wrote:
>
> > That did not correct it....Would the print server and router being
> > close to each other matter? I can connect with a NAT IP when the
> > computers are in the same room but it will not connect to the true IP
> > which I find on whatismyip.com
> >
>
> Check your DNS settings.
>
> Mlake
> --
> Elephant Boy Computers
> www.elephantboycomputers.com
> "Don't Panic!"
> MS-MVP Windows - Shell/User

I missed the first part, but if you are using a router for NAT, it
typically will not let you connect to the WAN side address that
you would get from "whatsmyip.com". That is part of the
protection the routers provide -- they do not accept connections
unless it is part of an ongoing "conversation" (sort of like dial out
only phones). I have my router set to discard the icmp echo
(Ping) from the WAN side so it is mostly invisible unless I
originate the connection.

mikey

Archived from groups: microsoft.public.windows.networking.wireless (More info?)

You can open a port and bypass the router firewall, which is what I have
done and it used to work fine. My problem did not start until I put the
wireless print server on. Must have something to do with frequencies.

The print server is using a set DNS but the router is automatic.

"Mike Fields" <spam_me_not_mr.gadget2@comcast.net> wrote in message
news:eo6mg$5jFHA.3312@TK2MSFTNGP10.phx.gbl...
>
> "Malke" <invalid@not-real.com> wrote in message
> news:e%23y72LsjFHA.3568@TK2MSFTNGP10.phx.gbl...
>> ME Johnson wrote:
>>
>> > That did not correct it....Would the print server and router being
>> > close to each other matter? I can connect with a NAT IP when the
>> > computers are in the same room but it will not connect to the true IP
>> > which I find on whatismyip.com
>> >
>>
>> Check your DNS settings.
>>
>> Mlake
>> --
>> Elephant Boy Computers
>> www.elephantboycomputers.com
>> "Don't Panic!"
>> MS-MVP Windows - Shell/User
>
> I missed the first part, but if you are using a router for NAT, it
> typically will not let you connect to the WAN side address that
> you would get from "whatsmyip.com". That is part of the
> protection the routers provide -- they do not accept connections
> unless it is part of an ongoing "conversation" (sort of like dial out
> only phones). I have my router set to discard the icmp echo
> (Ping) from the WAN side so it is mostly invisible unless I
> originate the connection.
>
> mikey
>
>