Archived from groups: alt.comp.hardware.pc-homebuilt (More info?)

I know very little to zero about overclocking. I would like to read up on it
and get an idea of the whole concept.

First, could someone please recommend some documentation, etc. that will
give me some insight?

Second, my system is as follows, could someone give me an idea at what speed
overclocking would achieve?

Many thanks in advance, Rob.

OPERATING SYSTEM

Microsoft Windows XP/2002 Professional (Win32 x86) 5.01.2600 (Service Pack
1)


PROCESSOR

Model : Intel(R) Pentium(R) 4 CPU 2.40GHz

Speed : 2.39GHz

Performance Rating : PR2626 (estimated)

Type : Standard

L2 On-board Cache : 512kB ECC Synchronous ATC (8-way sectored, 64 byte line
size)

Rated Speed/FSB : 2400MHz / 4x 133MHz

Multiplier : 18/1x

Minimum/Maximum Multiplier : 0/1x / 18/1x

Generation : G7

Name : P4N (Northwood) Pentium 4C 130nm 1.6-3.4GHz 1.475-1.575V

Revision/Stepping : 2 / 4 (9)

Stepping Mask : B0

Microcode : MU0F2418

Core Voltage Rating : 1.500V

Maximum Physical / Virtual Addressing : 36-bit / 32-bit

Native Page Size : 4kB



Co-Processor (FPU)

Type : Built-in

Revision/Stepping : 2 / 4 (9)



Processor Cache(s)

Internal Data Cache : 8kB Synchronous Write-Thru (4-way sectored, 64 byte
line size)

Internal Trace Cache : 12kB Synchronous Write-Thru (8-way, 64 byte line
size)

L2 On-board Cache : 512kB ECC Synchronous ATC (8-way sectored, 64 byte line
size)

L2 Cache Multiplier : 1/1x (2387MHz)



MOTHERBOARD

Bus(es) : X-Bus AGP PCI IMB USB FireWire/1394 i2c/SMBus

MP Support : 1 CPU(s)

MP APIC : Yes

System BIOS : Intel Corp. MV85010A.86A.0069.P25.0304170949

System : Alienware

Mainboard : Intel Corporation D850EMV2

Total Memory : 1023MB RDRAM



CHIPSET

Model : Intel Corporation 82850/E Host-Hub Interface Bridge Device (A3-step)

Front Side Bus Speed : 4x 133MHz (532MHz data rate)

Total Memory : 1024MB RDRAM

Memory Bus Speed : 2x 399MHz (798MHz data rate)



MEMORY

SPD Memory Modules:
Samsung MR16R 1628AF0-CM8 256 MB PC800 RDRAM
Samsung MR16R 1628AF0-CM8 256 MB PC800 RDRAM
Samsung MR18R 082GBN1-CK8 256 MB PC800 RDRAM
Samsung MR18R 082GBN1-CK8 256 MB PC800 RDRAM

Archived from groups: alt.comp.hardware.pc-homebuilt (More info?)

You could start at http://www.overclockers.com.

In their CPU database, you'll find, for example, that someone has taken a P4
2.4b to over 4 GHz. "LN2" is liquid nitrogen, though, so it was a stunt
rather than a practical machine.

Your system has mainboard that was made by Intel, so it probably does not
have any built-in overclocking. It also uses an 850E chipset, which requires
Rambus memory. It's supposed to be fast, but it does not appear to be loved
by overclockers.

The least expensive reliable way to overclock may be to not overclock at
all. The fastest CPU for the 533 MHz FSB (front side bus) is a "Northwood"
3.06 GHz. They are available at Newegg (www.newegg.com) for $233US, with
free shipping. Be sure to avoid the 3.0 GHz CPUs, with the 800 MHz FSB.

Let me be clear: I'm not trying to persuade you not to overclock, I just
think it would be excessively difficult with your system. I'm writing this
on a homebuilt system that uses an Asus P4P800 mainboard (Intel 865PE
chipset) and DDR400 (= PC3200) memory. The CPU is a 2.6c run at 13*250 (3.25
GHz). All that I've changed to get to there was to replace the original
fan/heatsink with an all-copper aftermarket unit.

Have fun.

Address altered. Replace nkbob with bobkn.

"Rob" <rbaysinger@cox.net> wrote in message
news:W9iKc.16435$Oi5.14193@okepread07...
> I know very little to zero about overclocking. I would like to read up on
it
> and get an idea of the whole concept.
>
> First, could someone please recommend some documentation, etc. that will
> give me some insight?
>
> Second, my system is as follows, could someone give me an idea at what
speed
> overclocking would achieve?
>
> Many thanks in advance, Rob.
>
> OPERATING SYSTEM
>
> Microsoft Windows XP/2002 Professional (Win32 x86) 5.01.2600 (Service Pack
> 1)
>
>
> PROCESSOR
>
> Model : Intel(R) Pentium(R) 4 CPU 2.40GHz
>
> Speed : 2.39GHz
>
> Performance Rating : PR2626 (estimated)
>
> Type : Standard
>
> L2 On-board Cache : 512kB ECC Synchronous ATC (8-way sectored, 64 byte
line
> size)
>
> Rated Speed/FSB : 2400MHz / 4x 133MHz
>
> Multiplier : 18/1x
>
> Minimum/Maximum Multiplier : 0/1x / 18/1x
>
> Generation : G7
>
> Name : P4N (Northwood) Pentium 4C 130nm 1.6-3.4GHz 1.475-1.575V
>
> Revision/Stepping : 2 / 4 (9)
>
> Stepping Mask : B0
>
> Microcode : MU0F2418
>
> Core Voltage Rating : 1.500V
>
> Maximum Physical / Virtual Addressing : 36-bit / 32-bit
>
> Native Page Size : 4kB
>
>
>
> Co-Processor (FPU)
>
> Type : Built-in
>
> Revision/Stepping : 2 / 4 (9)
>
>
>
> Processor Cache(s)
>
> Internal Data Cache : 8kB Synchronous Write-Thru (4-way sectored, 64 byte
> line size)
>
> Internal Trace Cache : 12kB Synchronous Write-Thru (8-way, 64 byte line
> size)
>
> L2 On-board Cache : 512kB ECC Synchronous ATC (8-way sectored, 64 byte
line
> size)
>
> L2 Cache Multiplier : 1/1x (2387MHz)
>
>
>
> MOTHERBOARD
>
> Bus(es) : X-Bus AGP PCI IMB USB FireWire/1394 i2c/SMBus
>
> MP Support : 1 CPU(s)
>
> MP APIC : Yes
>
> System BIOS : Intel Corp. MV85010A.86A.0069.P25.0304170949
>
> System : Alienware
>
> Mainboard : Intel Corporation D850EMV2
>
> Total Memory : 1023MB RDRAM
>
>
>
> CHIPSET
>
> Model : Intel Corporation 82850/E Host-Hub Interface Bridge Device
(A3-step)
>
> Front Side Bus Speed : 4x 133MHz (532MHz data rate)
>
> Total Memory : 1024MB RDRAM
>
> Memory Bus Speed : 2x 399MHz (798MHz data rate)
>
>
>
> MEMORY
>
> SPD Memory Modules:
> Samsung MR16R 1628AF0-CM8 256 MB PC800
RDRAM
> Samsung MR16R 1628AF0-CM8 256 MB PC800
RDRAM
> Samsung MR18R 082GBN1-CK8 256 MB PC800
RDRAM
> Samsung MR18R 082GBN1-CK8 256 MB PC800
RDRAM
>
>

Archived from groups: alt.comp.hardware.pc-homebuilt (More info?)

Don't know about all the below but pretty much same setup. Newest bios
update allows fsb to be taken to 200. Have a 2.8 533fsb in machine running
at 145fsb for a 3.04 effective processor. Very stable so far.

Larry

"Bob Knowlden" <nkbob@comcast.net> wrote in message
news:2lu118Fgp1aqU1@uni-berlin.de...
> You could start at http://www.overclockers.com.
>
> In their CPU database, you'll find, for example, that someone has taken a
P4
> 2.4b to over 4 GHz. "LN2" is liquid nitrogen, though, so it was a stunt
> rather than a practical machine.
>
> Your system has mainboard that was made by Intel, so it probably does not
> have any built-in overclocking. It also uses an 850E chipset, which
requires
> Rambus memory. It's supposed to be fast, but it does not appear to be
loved
> by overclockers.
>
> The least expensive reliable way to overclock may be to not overclock at
> all. The fastest CPU for the 533 MHz FSB (front side bus) is a "Northwood"
> 3.06 GHz. They are available at Newegg (www.newegg.com) for $233US, with
> free shipping. Be sure to avoid the 3.0 GHz CPUs, with the 800 MHz FSB.
>
> Let me be clear: I'm not trying to persuade you not to overclock, I just
> think it would be excessively difficult with your system. I'm writing this
> on a homebuilt system that uses an Asus P4P800 mainboard (Intel 865PE
> chipset) and DDR400 (= PC3200) memory. The CPU is a 2.6c run at 13*250
(3.25
> GHz). All that I've changed to get to there was to replace the original
> fan/heatsink with an all-copper aftermarket unit.
>
> Have fun.
>
> Address altered. Replace nkbob with bobkn.
>
> "Rob" <rbaysinger@cox.net> wrote in message
> news:W9iKc.16435$Oi5.14193@okepread07...
> > I know very little to zero about overclocking. I would like to read up
on
> it
> > and get an idea of the whole concept.
> >
> > First, could someone please recommend some documentation, etc. that will
> > give me some insight?
> >
> > Second, my system is as follows, could someone give me an idea at what
> speed
> > overclocking would achieve?
> >
> > Many thanks in advance, Rob.
> >
> > OPERATING SYSTEM
> >
> > Microsoft Windows XP/2002 Professional (Win32 x86) 5.01.2600 (Service
Pack
> > 1)
> >
> >
> > PROCESSOR
> >
> > Model : Intel(R) Pentium(R) 4 CPU 2.40GHz
> >
> > Speed : 2.39GHz
> >
> > Performance Rating : PR2626 (estimated)
> >
> > Type : Standard
> >
> > L2 On-board Cache : 512kB ECC Synchronous ATC (8-way sectored, 64 byte
> line
> > size)
> >
> > Rated Speed/FSB : 2400MHz / 4x 133MHz
> >
> > Multiplier : 18/1x
> >
> > Minimum/Maximum Multiplier : 0/1x / 18/1x
> >
> > Generation : G7
> >
> > Name : P4N (Northwood) Pentium 4C 130nm 1.6-3.4GHz 1.475-1.575V
> >
> > Revision/Stepping : 2 / 4 (9)
> >
> > Stepping Mask : B0
> >
> > Microcode : MU0F2418
> >
> > Core Voltage Rating : 1.500V
> >
> > Maximum Physical / Virtual Addressing : 36-bit / 32-bit
> >
> > Native Page Size : 4kB
> >
> >
> >
> > Co-Processor (FPU)
> >
> > Type : Built-in
> >
> > Revision/Stepping : 2 / 4 (9)
> >
> >
> >
> > Processor Cache(s)
> >
> > Internal Data Cache : 8kB Synchronous Write-Thru (4-way sectored, 64
byte
> > line size)
> >
> > Internal Trace Cache : 12kB Synchronous Write-Thru (8-way, 64 byte line
> > size)
> >
> > L2 On-board Cache : 512kB ECC Synchronous ATC (8-way sectored, 64 byte
> line
> > size)
> >
> > L2 Cache Multiplier : 1/1x (2387MHz)
> >
> >
> >
> > MOTHERBOARD
> >
> > Bus(es) : X-Bus AGP PCI IMB USB FireWire/1394 i2c/SMBus
> >
> > MP Support : 1 CPU(s)
> >
> > MP APIC : Yes
> >
> > System BIOS : Intel Corp. MV85010A.86A.0069.P25.0304170949
> >
> > System : Alienware
> >
> > Mainboard : Intel Corporation D850EMV2
> >
> > Total Memory : 1023MB RDRAM
> >
> >
> >
> > CHIPSET
> >
> > Model : Intel Corporation 82850/E Host-Hub Interface Bridge Device
> (A3-step)
> >
> > Front Side Bus Speed : 4x 133MHz (532MHz data rate)
> >
> > Total Memory : 1024MB RDRAM
> >
> > Memory Bus Speed : 2x 399MHz (798MHz data rate)
> >
> >
> >
> > MEMORY
> >
> > SPD Memory Modules:
> > Samsung MR16R 1628AF0-CM8 256 MB PC800
> RDRAM
> > Samsung MR16R 1628AF0-CM8 256 MB PC800
> RDRAM
> > Samsung MR18R 082GBN1-CK8 256 MB PC800
> RDRAM
> > Samsung MR18R 082GBN1-CK8 256 MB PC800
> RDRAM
> >
> >
>
>