<A HREF="http://www.geocities.com/antireligionclub3/" target="_new">P4 Overclocking Guide</A>


Update: You probably noticed that in my guide there aren't any instructions on how to overclock the new LGA775 chips, they're all the same principal, push vcore up slightly, go bit by bit, like 5FSB. I will be writing a new extensive guide on what hardware is needed and how to overclock the Socket775 chips, once the Presler and Cedar Mill core CPU's are released.<P ID="edit"><FONT SIZE=-1><EM>Edited by scottchen on 07/25/05 05:39 PM.</EM></FONT></P>

How about a guide on overclocking an mPGA-478 P4's.

What about a Celeron guide?

How to overclock my Intel P4 630 3.0 GHz (Prescott) in Bios ?
Help Me plz i think this overclock option is disabled.

shock, what brand/model board do you have? if you're lucky i will recognise the bios type and be able to tell you waht you need to do.

До каких частот можно разогнать Pentium D 820? И на сколько это выгодно (по производительности )? Up to what frequencies it is possible to disperse Pentium D 820? And on how many it is favourable (on productivity)?

siodfjnikghbosdjngjncvmnkhf aosd;ignhdkkjdxfpojesikurhg doi&^!@^%#$&^*($^@

sry dude translation plz

Ты вообще понял что написал? если да, то переводи сам, потому что на кривых языках я не разговариваю! You in general have understood that have written? If yes, translate itself because in curve languages I do not talk!

Как мне свой 5800 баллов в 3D Mark 2005 увеличить до 6500? Память гнать бесполезно. Мой компьютер: Intel Pentium D 820, MSI 945P neo2 F, 2*512 Kingston pc-5300, nVidia 7600 GT. How to me the 5800 points in 3D Mark 2005 to increase up to 6500? Memory to drive it is useless. My computer: Intel Pentium D 820, MSI 945P neo2 F, 2*512 Kingston pc-5300, nVidia 7600 GT.

Nobody understands you matey. You need to check your post and try and send it in english, in some kind of sentenced, understandable structre!

Either that or try and find a russian overclock forum?

Good luck in your attemps anyway

Forums to search to me for laziness, and that he is well overclocked I know, simply wished to know up to what limits. And here the "Project 5Gh " has come having recollected a roller .

The link is dead. Does anyone know if this guide is hosted somewhere else or where I can find a similar guide to show me how to overclock my P4 3.0E?

yea what he said. specifically pc4 2.8ghz ones to 3.0ghz.

My P4 3.2 GHz HT runs smoothly and cool up to 3.6 GHz.

At 3.8 it crashed with little load.
Using stock cooler.

All the OC has been done with the Asus tool.

I am wondering if replacing the stock Intel cooler for a Zalman CNPS9500 LED would improve anything...

:?: hi, any know which version of Memtest86 should i dl for window Xp sp2. plz specific one. tahx in advance

the version I use is a bootable CD, therefore it's OS-independent.

Just download the ISO image, burn the CD and reboot.

Also, most Linux CD's comes with an option to boot to Memtest86.



A refresh on my last post:

Changing the stock cooler to a Zalman alowed me to OC up to 3.73 GHz. I had to lower the speeds a little after I added another Gb of RAM w/ different timings.

I have a P4 3.2 6XX H/T 800 FSB.... P5ND2 SLI MOBO.... mushkin ddr2 533 mhz 4-4-4-12... Ultra xfinity 500 watt psu... Ultra cpu cooler 3.2-3.8

current setting:
clock:

core speed-- 3920.2 mhz
mutiplier-- X16
buss speed-- 245 mhz
rated fsb-- 950 mhz

memory timing: original setting 4-5-5-13 dual channel
NOW:

frequency-- 245 mhz
fsbram-- 1:1
cas# latency-- 2.0 clocks
ras# to cas# delay--3 clocks
ras# precharge-- 3 clocks
cycle time (tras)-- 5 clocks
bank cycle time (trc)-- 9 clocks

With this new settings it do not hang up. I tried burning movies using nero7 ulra edition. Also running at the same time, avira anti virus (scanning), Azureus and U-torrent downloading at the same time.... With all this running do not hang-up... with this load temp. is 36c to 42c.... with no load its 24c... mobo stays on 36 all the time

well i have a celeron d 2.5ghz i want to over clock along with a 3.6ghz lga 775 ht.

Useful guide, but doesn't mention what you can get away with setting a 3.4 S478 exteme edition to

Sure wish i would't have bought the mighty un-overcockable ECS motherboard when i got my p4, good article though