Samsung Galaxy tablet

[distylynn]

How do I make my SD card the default for my Samsung Galaxy Tab e also how do I add my apps to my SD for my Samsung Galaxy Tab E?

 

[webworkings]

Well in most cases you can't run apps from a SD card (only a few here and there). It also depends on the version of Android running and the manufacturer (they limit this ability on some devices). The only way to know for sure is to try doing it. Below are the instructions on how it is done.

First, you need to be using a tablet that is running at least Android "Marshmallow" (or newer) or be able to upgrade to it. Second, you will need the instructions I am including below. And third, you need a phone that has not been restricted by the manufacturer from making this change. Which does happen.

NOTE: If any of the steps are missing on your tablet, or they don't work for you, then you have a tablet that either has an older Android version or has been restricted by the manufacturer.


How to turn the "External" SD card into "Internal" storage on "Marshmallow".

NOTE: Please be sure you start with a blank SD card. It needs to be blank because when the card is converted to "Internal" storage, it will be formatted (wiped) and encoded (making the cards data only readable by that device).

1. Go to device “Settings”, then select “Storage”.
2. Select your "SD Card", then tap the “three-dot menu“ (top-right), now select “Settings” from in there.
3. Now select “Format as internal”, and then “Erase & Format”.
4. Your SD Card will now be formatted as internal storage.
5. Reboot your tablet.

NOTE: If you don't reboot the tablet, many things may not work correctly, so make sure you do.


How to turn the "External" SD card into "Internal" storage on "Nougat".

IMPORTANT NOTE: Be sure you start with a blank SD card. When the card is converted to "Internal" storage, it will be formatted (wiped) and encoded (making the cards data only readable by that device), so anything on it prior would be gone.

1. Go to "Settings", and then select "Storage & USB".
2. At the bottom of the list you should see the SD card's details, including the option to format it and make it "Internal" storage.
3. Once this is done, reboot the device and you can start running things from the card.

If you don't reboot the tablet, some things may not work correctly, so make sure you do the reboot.