my zte pro

Solution
Try the following and see if it will turn on.

1. Remove the battery.
2. Press and hold the "Power" button for 20 seconds.
3. Now put the battery back in.
4. Plug it in to charge and allow it to fully charge before turning it on.

If this doesn't help, then test the charger cord to see if it is good. Either try your cord in another device, or try another devices cord on your device.

Should that not be the problem, then check the battery to see if it needs replacing.

NOTE: Yes, I know some phone batteries are not so easy to get to, on some devices. In such a case, make sure that your phone is not under warranty still before you try opening it up yourself. If it is under warranty, then contact the manufacturer first.

Mr_28_

Prominent
May 28, 2017
9
0
510
MERGED QUESTION
Question from Mr_28_ : "zte pro max issues"

my zte pro max has been dead for over three days and want come on nor led . What should i do
 

Mr_28_

Prominent
May 28, 2017
9
0
510
MERGED QUESTION
Question from Mr_28_ : "how to reboot"

phone hasbeen completly dead for three days. it wont charge, no led. how do i turn on to reboot?
 

Mr_28_

Prominent
May 28, 2017
9
0
510
MERGED QUESTION
Question from Mr_28_ : "how to reboot a zte pro max"

phone hasbeen completly dead for three days. it wont charge, no led. how do i turn on to reboot?
 
Try the following and see if it will turn on.

1. Remove the battery.
2. Press and hold the "Power" button for 20 seconds.
3. Now put the battery back in.
4. Plug it in to charge and allow it to fully charge before turning it on.

If this doesn't help, then test the charger cord to see if it is good. Either try your cord in another device, or try another devices cord on your device.

Should that not be the problem, then check the battery to see if it needs replacing.

NOTE: Yes, I know some phone batteries are not so easy to get to, on some devices. In such a case, make sure that your phone is not under warranty still before you try opening it up yourself. If it is under warranty, then contact the manufacturer first.
 
Solution