Solved! Dell Hell -- Video and D/Port

G

Guest

Guest
Hi all,

Here's the equipment in play:

1) Dell Latitude D520 with the Intel 945GM Chipset
2) Dell SE178WFP with the VGA cable
3) Dell D/Port

When the laptop is directly connected to the display, the video works fine. When the display and laptop are both hooked to the dock, there is no video. Instead, I get a message which says "Cannot display this video mode." The old CRT will work when connected to the dock.

Something is wrong and I have no idea what it is.
 
Solution
Is there no video only on the external display, or on both the laptop and the external monitor? If only on the externam monitor, your resolution and/or refresh rate is probably too high. Use both screens, and set the resolution on the second display. For a 17" LCD, you probably will be using 1280x1024 at 60hz. If you had a CRT before you may have had it at some odd refresh rate that the LCD can't display.

rpg123

Distinguished
Jun 28, 2010
58
0
18,590
Sometimes updating the video drivers will correct poblems like that, worth a shot. Maybe lowering the resolution, if that chipset gpu can't handle both at high rez. Just guessing.
 
Is there no video only on the external display, or on both the laptop and the external monitor? If only on the externam monitor, your resolution and/or refresh rate is probably too high. Use both screens, and set the resolution on the second display. For a 17" LCD, you probably will be using 1280x1024 at 60hz. If you had a CRT before you may have had it at some odd refresh rate that the LCD can't display.
 
Solution