Problem saving files using CoolEdit 96 on Windows XP

[Jezza]

Archived from groups: rec.audio.tech (More info?)

For years I have used the registered version of Cooledit 96 and, as it
satisfies all my simple WAV processing requirements, I saw no need to
upgrade. Adobe Audution is now beyond my price range.

I've just bought a new PC running Windows XP Home Edition. In
Cooledit 96 everything works well until I try to Save an open file- I
then always get "Invalid file or format". "Save As" works fine but I
don't want multiple copies of the same track which means I then have
to delete and rename files all the time.

My C: drive is NTFS but I get exactly the same problem on my FAT32 D:
drive. I've disabled write caching and stopped the Indexing Service
indexing the disk, but it makes no difference.

I've seen no mention of this problem anywhere on the Net and I can't
believe I'm the only one with this problem. Any ideas anyone? Many
thanks.

 

[Guest]

Archived from groups: rec.audio.tech (More info?)

Jezza wrote:

><snip>
> I've just bought a new PC running Windows XP Home Edition. In
> Cooledit 96 everything works well until I try to Save an open file- I
> then always get "Invalid file or format". "Save As" works fine but I
> don't want multiple copies of the same track which means I then have
> to delete and rename files all the time.
><snip>

Since I don't have the same software but CoolEditPro and Win98SE, I can
only offer suggestions.

If the only thing you are doing differently is using WinXP instead of an
older OS, then perhaps you can tell WinXP to run in a Win98 emulation
mode via the Cooledit96 shortcut. It might help.

Since the error is one of file format, you may be inadvertently doing
something wrong in Cooledit96. What is the format of the original sound
file? What format does Cooledit96 expect the file to be stored as?

Even people with the same software as yours will need more information
to offer good suggestions.

 

[Jezza]

Archived from groups: rec.audio.tech (More info?)

Robert Gault <robert.gault@worldnet.att.net> wrote in message news:<ACFwc.40547$_k3.995309@bgtnsc05-news.ops.worldnet.att.net>...
> Jezza wrote:
>
> ><snip>
> > I've just bought a new PC running Windows XP Home Edition. In
> > Cooledit 96 everything works well until I try to Save an open file- I
> > then always get "Invalid file or format". "Save As" works fine but I
> > don't want multiple copies of the same track which means I then have
> > to delete and rename files all the time.
> ><snip>
>
> Since I don't have the same software but CoolEditPro and Win98SE, I can
> only offer suggestions.
>
> If the only thing you are doing differently is using WinXP instead of an
> older OS, then perhaps you can tell WinXP to run in a Win98 emulation
> mode via the Cooledit96 shortcut. It might help.
>
> Since the error is one of file format, you may be inadvertently doing
> something wrong in Cooledit96. What is the format of the original sound
> file? What format does Cooledit96 expect the file to be stored as?
>
> Even people with the same software as yours will need more information
> to offer good suggestions.

Thanks for the reply. I know I'm not doing anything incorrectly or
differently within Cooledit- I'm just opening a WAV ripped by Exact
Audio Copy, Audiograbber or dbPowerAmp (I tried them all, but WAVs
produced by all three yield the same error, so ripping isn't the
problem), then performing a simple operation such as deleting some of
the silence at the end of the track, and then trying to save, but it's
no go. As mentioned, Save As will work, but then reopening the new
file, making a change and trying to save that will again produce the
error.

I tried the compatability emulation option that you mentioned, and
specifying Windows 98 compatibility *does work* so thanks for that tip
(for reference, NT and Windows 2000 compatibility don't work).
However, anything involving a disk operation, such as saving undo
data, is *so* slow. I'm not particularly techno-savvy I'm afraid, but
I would say the problem seems to be something to do with the way
Cooledit handles its 'virtual' files. Indeed, if I switch off Win98
emulation and run it normally again under XP, I find I can use Save if
I do File | Flush Virtual File first, but that takes forever.

I hope there is a solution as I haven't found another audio editor
anywhere near as good and intuitive as Cooledit.

 

[Guest]

Archived from groups: rec.audio.tech (More info?)

On 6/6/2004 06:54, Jezza wrote:

> For years I have used the registered version of Cooledit 96 and, as it
> satisfies all my simple WAV processing requirements, I saw no need to
> upgrade. Adobe Audution is now beyond my price range.
>
> I've just bought a new PC running Windows XP Home Edition. In
> Cooledit 96 everything works well until I try to Save an open file- I
> then always get "Invalid file or format". "Save As" works fine but I
> don't want multiple copies of the same track which means I then have
> to delete and rename files all the time.
>
> My C: drive is NTFS but I get exactly the same problem on my FAT32 D:
> drive. I've disabled write caching and stopped the Indexing Service
> indexing the disk, but it makes no difference.
>
> I've seen no mention of this problem anywhere on the Net and I can't
> believe I'm the only one with this problem. Any ideas anyone? Many
> thanks.

Can you use "Save As..." and just overwrite the original file? At
least that way, you wouldn't have to deal with multiple versions of
the same track.

I do understand, however, that this will still be somewhat of a
pain in the neck... but it might be better than living with the
performance problems you mentioned when setting the W/98 compatibility
mode.

 

[Guest]

Archived from groups: rec.audio.tech (More info?)

Jezza wrote:
> For years I have used the registered version of Cooledit 96 and, as it
> satisfies all my simple WAV processing requirements, I saw no need to
> upgrade. Adobe Audution is now beyond my price range.
>
> I've just bought a new PC running Windows XP Home Edition. In
> Cooledit 96 everything works well until I try to Save an open file- I
> then always get "Invalid file or format". "Save As" works fine but I
> don't want multiple copies of the same track which means I then have
> to delete and rename files all the time.

There are a variety of compatibility settings that are acessible via the
compatibility tab of a shortcut pointing to the EXE file that you are trying
to run. You might want to try to check out options relating to running it
in win95 compatibility mode.

http/www.microsoft.com/windowsxp/pro/using/howto/gethelp/appcompat.asp
discusses this in more detail.

also:

http/www.wintrouble.net/discus/messages/53/5259.html?1081362960

 

[Guest]

Archived from groups: rec.audio.tech (More info?)

Jezza wrote:

> For years I have used the registered version of Cooledit 96 and, as it
> satisfies all my simple WAV processing requirements, I saw no need to
> upgrade. Adobe Audution is now beyond my price range.

Understood.

> I've just bought a new PC running Windows XP Home Edition. In
> Cooledit 96 everything works well until I try to Save an open file- I
> then always get "Invalid file or format". "Save As" works fine but I
> don't want multiple copies of the same track which means I then have
> to delete and rename files all the time.

I am confused, I recently used it on a winxpprof installation, and I
can't recall any problems.

> My C: drive is NTFS but I get exactly the same problem on my FAT32 D:
> drive. I've disabled write caching and stopped the Indexing Service
> indexing the disk, but it makes no difference.

I can't remember the options exactly, but first I'd enable "use systems
cache", and re-enable write caching. Indexing service can be a
pestilence, but is is not the cause of the issue. File system is also
irrelevant.

> I've seen no mention of this problem anywhere on the Net and I can't
> believe I'm the only one with this problem. Any ideas anyone? Many
> thanks.

For a starter: just how large files are you trying to create with it?

Note: the version I used was the unreg one, I didn't register until CE2k
came to be. This may make a difference. Adobe has a forum for Audition,
I think you should ask there, the "old knowhow" is also around.


Kind regards

Peter Larsen

--
*******************************************
* My site is at: http/www.muyiovatki.dk *
*******************************************

 

[Guest]

Archived from groups: rec.audio.tech (More info?)

On 6 Jun 2004 06:54:18 -0700, jezza2412@yahoo.co.uk (Jezza) wrote:

>For years I have used the registered version of Cooledit 96 and, as it
>satisfies all my simple WAV processing requirements, I saw no need to
>upgrade. Adobe Audution is now beyond my price range.
>
>I've just bought a new PC running Windows XP Home Edition. In
>Cooledit 96 everything works well until I try to Save an open file- I
>then always get "Invalid file or format". "Save As" works fine but I
>don't want multiple copies of the same track which means I then have
>to delete and rename files all the time.

Hi,

I checked with CE96 (version 1.53) saving on both FAT-32 and NTFS
(system partition). It works well, no problem. OS in Windows XP pro
with service pack 1 and all important patches. However, I noted that
CE96 uses the file selection utility in 8.3 file name mode or even in
a Win 3.x compatibility mode. Maybe there's a problem with long file
names, either because of some ambiguity or missing 8.3 file name
support in your system. 8.3 file name support can be disabled in XP.

Norbert

 

[Jezza]

Archived from groups: rec.audio.tech (More info?)

Mark Hansen <meh@NOSPAMunify.com> wrote in message news:<10c8q9hp8id31d9@corp.supernews.com>...
> On 6/6/2004 06:54, Jezza wrote:
>
> > For years I have used the registered version of Cooledit 96 and, as it
> > satisfies all my simple WAV processing requirements, I saw no need to
> > upgrade. Adobe Audution is now beyond my price range.
> >
> > I've just bought a new PC running Windows XP Home Edition. In
> > Cooledit 96 everything works well until I try to Save an open file- I
> > then always get "Invalid file or format". "Save As" works fine but I
> > don't want multiple copies of the same track which means I then have
> > to delete and rename files all the time.
> >
> > My C: drive is NTFS but I get exactly the same problem on my FAT32 D:
> > drive. I've disabled write caching and stopped the Indexing Service
> > indexing the disk, but it makes no difference.
> >
> > I've seen no mention of this problem anywhere on the Net and I can't
> > believe I'm the only one with this problem. Any ideas anyone? Many
> > thanks.
>
> Can you use "Save As..." and just overwrite the original file? At
> least that way, you wouldn't have to deal with multiple versions of
> the same track.
>
> I do understand, however, that this will still be somewhat of a
> pain in the neck... but it might be better than living with the
> performance problems you mentioned when setting the W/98 compatibility
> mode.

Unfortunately no, Save As with the original filename gives me exactly
the same error. Thanks for the suggestion though.

 

[Jezza]

Archived from groups: rec.audio.tech (More info?)

Peter Larsen <SPAMSHIELD_plarsen@mail.tele.dk> wrote in message news:<40CCC948.2F0FA81A@mail.tele.dk>...
> Jezza wrote:
>
> > For years I have used the registered version of Cooledit 96 and, as it
> > satisfies all my simple WAV processing requirements, I saw no need to
> > upgrade. Adobe Audution is now beyond my price range.
>
> Understood.
>
> > I've just bought a new PC running Windows XP Home Edition. In
> > Cooledit 96 everything works well until I try to Save an open file- I
> > then always get "Invalid file or format". "Save As" works fine but I
> > don't want multiple copies of the same track which means I then have
> > to delete and rename files all the time.
>
> I am confused, I recently used it on a winxpprof installation, and I
> can't recall any problems.
>

As I do seem to be the only one experiencing trouble, then I'm hopeful
that it is just a simple setting somewhere on my PC that I need to
change. However, I have tried everything suggested by the folks who
kindly took the time to respond in this thread but am still no nearer
to finding the solution.

> > My C: drive is NTFS but I get exactly the same problem on my FAT32 D:
> > drive. I've disabled write caching and stopped the Indexing Service
> > indexing the disk, but it makes no difference.
>
> I can't remember the options exactly, but first I'd enable "use systems
> cache", and re-enable write caching. Indexing service can be a
> pestilence, but is is not the cause of the issue. File system is also
> irrelevant.
>
> > I've seen no mention of this problem anywhere on the Net and I can't
> > believe I'm the only one with this problem. Any ideas anyone? Many
> > thanks.
>
> For a starter: just how large files are you trying to create with it?
>

I'm just trying to work with typical 3 minute (around 35Mb) WAV files
ripped from CD.

The only functions I really use are add/delete silence, fade-in/fade
out, normalize and mix paste, so I'm not doing anything ambitious, but
Cooledit does these things more intuitively than anything else I've
tried. The problem definitely seems to be to do with Cooledit's
"virtual file" handling as it is only operations that change the track
length that cause the trouble.

> Note: the version I used was the unreg one, I didn't register until CE2k
> came to be. This may make a difference. Adobe has a forum for Audition,
> I think you should ask there, the "old knowhow" is also around.
>

I tried uninstalling Cooledit 96, then rebooting and reinstalling but
it now always comes up as the registered version. Surely that can't
be the problem though?

>
> Kind regards
>
> Peter Larsen

 

[HappyDog]

I know this is an old thread, but in case anyone else comes across it, I thought I'd add that I've had the same problem, only on Windows 2000. Unfortunately I have not found a solution, but here is my workaround.

The problem:

1) Load a WAV file (any size, even tiny ones)
2) Do some modification (e.g. trim it)
3) Click 'Save' (not save as)
You get the invalid file format message.

The workaround:
Between steps 2 and 3:
2.1) Select the entire file
2.2) Copy to clipboard
2.3) Paste from clipboard
Now 'save' works as expected.

Weird - I don't know if there's a better solution, but that's what I've been doing since I upgraded to Win2K, about 5 years ago! Hope it's helpful to somebody.