How To Change the Strap on a Moto 360 Smartwatch

cHHsP7k.jpg


The Moto 360 Smartwatch has made waves in the tech world because of its unique features. Compared to its peers which are square, the Moto 360 has a circular face and a wireless Qi-charger which is non-proprietary. Its band is also replaceable in case you want to customize it to your taste. Here's how you change the strap of the Moto 360 Smartwatch in simple easy steps.

1. Before you need a small flat precision screwdriver or a spring bar tool. The latter is much better but if you decide to use the flat screwdriver, you have to be careful so as not to crack the back casing of your watch.

qlRCg4w.jpg


2. To begin with, place your watch face down on a flat surface. Using the spring bar tool, push the strap out of the way in order to get into the spring.

3. Do the same process to the other strap. Remove the spring and set them aside in a safe place for later use.

4. Get the new strap and place the spring inside the other end and insert it into the watch. Using your finger, push the other end of the spring so that it will fit in to the watch. you can also use your tool to insert the spring, just be careful not to scratch the watch.

5. Repeat the same process on the other strap. Then adjust the strap to fit your wrist.