how to get 5 channel stereo in Harman Kardon AVR 151
- Thread starter vimals73
- Start date
-
- Tags
- Harman Kardon Home Theatre TV
Solution
You don't mention how the AVR is connected to the TV.
If it's connected by HDMI-ARC or optical cable then make sure you have the output in the TV set to bitstream 5.1
Then select Auto or Dolby as your surround sound mode.
If it's connected with an analog stereo connection then you need to select a surround mode for a stereo input. There are usually more than one. If the receiver is left on Dolby it will usually go to Dolby Prologic II automatically when it receives 2 channel inputs. The owners manual usually explains how each mode works.
http
/tw.harmankardon.com/harman-kardon-product-detail_uk/hk-avr-151.html
Not all content will have rear information. A lot of programming will be center channel only unless you select a mode for a...
If it's connected by HDMI-ARC or optical cable then make sure you have the output in the TV set to bitstream 5.1
Then select Auto or Dolby as your surround sound mode.
If it's connected with an analog stereo connection then you need to select a surround mode for a stereo input. There are usually more than one. If the receiver is left on Dolby it will usually go to Dolby Prologic II automatically when it receives 2 channel inputs. The owners manual usually explains how each mode works.
http
/tw.harmankardon.com/harman-kardon-product-detail_uk/hk-avr-151.htmlNot all content will have rear information. A lot of programming will be center channel only unless you select a mode for a...
americanaudiophile
Titan
- Aug 27, 2008
- 14,933
- 146
- 103,240
You don't mention how the AVR is connected to the TV.
If it's connected by HDMI-ARC or optical cable then make sure you have the output in the TV set to bitstream 5.1
Then select Auto or Dolby as your surround sound mode.
If it's connected with an analog stereo connection then you need to select a surround mode for a stereo input. There are usually more than one. If the receiver is left on Dolby it will usually go to Dolby Prologic II automatically when it receives 2 channel inputs. The owners manual usually explains how each mode works.
http/tw.harmankardon.com/harman-kardon-product-detail_uk/hk-avr-151.html
Not all content will have rear information. A lot of programming will be center channel only unless you select a mode for a mono source.
If it's connected by HDMI-ARC or optical cable then make sure you have the output in the TV set to bitstream 5.1
Then select Auto or Dolby as your surround sound mode.
If it's connected with an analog stereo connection then you need to select a surround mode for a stereo input. There are usually more than one. If the receiver is left on Dolby it will usually go to Dolby Prologic II automatically when it receives 2 channel inputs. The owners manual usually explains how each mode works.
http
/tw.harmankardon.com/harman-kardon-product-detail_uk/hk-avr-151.htmlNot all content will have rear information. A lot of programming will be center channel only unless you select a mode for a mono source.
Similar threads
- Question
TRENDING THREADS
-
Question Can Minecraft 1.20.51 Apk be installed with high graphics on Realme 5?
- Started by BertramBlythe
- Replies: 0
-
-
Question low-cost laptop recommendations for gaming?
- Started by gutta
- Replies: 1
-
Question Buy a new Changingtouch lapdock recommendation- Started by Harold Robeson
- Replies: 1
-
Question NordPass issues with email masking?
- Started by Spotty352
- Replies: 0
-
Blacklisting phone with various variables- Started by Blindcracker
- Replies: 2
-
Facebook
Twitter