Your question
Solved

Windows just disappeared on my laptop. Now it won't boot up.

Tags:
  • Windows
  • Laptops
Last response: in Laptop Tech Support
December 22, 2017 3:26:52 PM

Was using my laptop, I walked away from my Toshiba Satellite C655 and came back to see the screen that says "Windows did not shut down properly. Please hit enter to start windows normally." I did and it went to a blank, black screen. Startup repair couldn't fix the problem and it flashed something that said windows could not be found. I restarted my computer after that and now it just goes to a black screen that shows: BOOTMGR is missing Press Ctrl+Alt+Del to restart. Nothing happens when I do. so looks like windows 7 is gone and now I can't get past that screen when I start my computer.

More about : windows disappeared laptop boot

Best solution

a c 1705 D Laptop
December 22, 2017 9:22:37 PM

Causes of this Error...

1. Incorrect boot order.
2. Partition not set as active.
3. Hard disk failure.


NOTE: Some of the solutions below require the use of the Microsoft Windows setup CD/DVD or USB.


1. Check Boot Order

The simplest fix for this error is to make sure your computer’s boot order correctly list your hard disk as the 1st option.

To check the boot order...

a. Restart your computer
b. Access your BIOS menu.
c. Go to the Boot tab.
d. Change the boot order so that your computer’s HDD is listed first.
e. Save the settings.
f. Restart your computer.

2. Partition not set as active.

This error will also appear if your primary partition is no longer set as 'active'. To set the primary partition as active, you need to use diskpart to run the necessary commands for this.

If you have the original Windows installation media, you can use that media:

a. Insert the Windows installation CD/DVD or USB and boot from that.
b. At System Recovery Options or the Troubleshoot, click Command Prompt.
c. Now type: "diskpart" (without the quotes) and press "Enter".
d. Next type: "select disk 0" (again without the quotes) and press "Enter".

NOTE: Where 0 is the disk’s number where your Windows is installed on. For a full list of disks that are available on your computer, type "list disk" (without the quotes).

e. Now you want to type: "list partition" (yes, without the quotes) and hit "Enter".
f. Here you will type in: "select partition 1" (you guessed it, without the quotes) and hit "Enter".

NOTE: Where 1 is your primary partition.

g. Finaly type: "active" (no quotes) and hit "Enter".

This should resolve the problem.


NOTE: If you don’t have the original installation media, you will need "Easy Recover Essentials" and run the fixes from the Command Prompt.
Share
Related resources
Tom’s guide in the world
  • Germany
  • France
  • Italy
  • Ireland
  • UK
Follow Tom’s guide
Subscribe to our newsletter
  • add to twitter
  • add to facebook
  • ajouter un flux RSS