Hi I have lenovo 50-70 whenever I type or click anywhere it selects first by default or cursor goes on top right. I have tried

iamprarthanasharma

Prominent
Dec 6, 2017
1
0
510
Hi I have lenovo 50-70 whenever I type or click anywhere it selects first by default or cursor goes on top right. I have tried external mouse also but it's not working.
 
Solution
First try updating your drivers. Should that not help...

Try starting up the device in "Safe Mode" and see if it works correctly in there. If it does, then I would scan the computer for viruses, malware, bad software, etc.

If the problem happens in "Safe Mode" as well, then it may be hardware, possibly the motherboard, that is having issues.

NOTE: If the device is still under warranty, contact the manufacturer.

How to enter "Safe Mode" when booting the computer.

In Windows 8 and 10...

As your computer restarts, press F8 (possibly a few times) to enter "Safe Mode"

a. Press the "F4" key to Enable "Safe Mode".
(The computer will then start in "Safe Mode" with a minimal set of drivers and services.)

b. Press the "F5" key to Enable...
First try updating your drivers. Should that not help...

Try starting up the device in "Safe Mode" and see if it works correctly in there. If it does, then I would scan the computer for viruses, malware, bad software, etc.

If the problem happens in "Safe Mode" as well, then it may be hardware, possibly the motherboard, that is having issues.

NOTE: If the device is still under warranty, contact the manufacturer.

How to enter "Safe Mode" when booting the computer.

In Windows 8 and 10...

As your computer restarts, press F8 (possibly a few times) to enter "Safe Mode"

a. Press the "F4" key to Enable "Safe Mode".
(The computer will then start in "Safe Mode" with a minimal set of drivers and services.)

b. Press the "F5" key to Enable "Safe Mode" with Networking.
( Once "Safe Mode" with Networking starts, Windows is in Safe Mode, with additional network and services for accessing the Internet and other computers on your network.)

c. Press the "F6" key to Enable "Safe Mode" with Command Prompt.
(In "Safe Mode" with "Command Prompt" starts Windows in Safe Mode, with a Command Prompt window instead of the Windows interface. This option is mostly only used by IT professionals.)

Now sign in to the computer with your account name and password. (If you have one set.) When you are finished troubleshooting, you can exit "Safe Mode" restarting your computer.


In Windows 7/Vista/XP...

1. Immediately after turning on the computer, or restarting it (usually after you hear your computer beep), tap the F8 key, repeatedly, in 1 second intervals.

2. The computer will then display hardware information and run a memory test.

3. Next the "Advanced Boot Options" menu will appear.

4. In the "Advanced Boot Options" menu use the arrow keys to select "Safe Mode" or "Safe Mode with Networking" and press ENTER.
 
Solution