I have a Philips Tv and I wanting to ask how can I have all my channels in my tv to work on every one of them. I'm wanting to

Project_2

Prominent
Jun 7, 2017
1
0
510
My TV will not have certain channels that don't show up. This makes me upset because I wanted to watch NFL Network but it keeps saying this "Complete Signal Loss"
 
Solution
Are you using a Cable box, Fiber Optic box or Satellite box? That would be an issue with your satellite/cable/fiber provider.

Even if it is a direct connection and you use a CableCard. That would be a signal issue from your provider. Although you may have to play phone tag between Phillips and your cable provider.

You may need a signal booster. This is what I use. If you have cable internet you'll want want like this with a modem bypass. If you have multiple TVs you probably could use a booster. Your cable provider will install one but you'd have to pay a support call. Which may be best as the wiring can be a pain. Wherever your cable lines are split is where has to be installed. Usually this is outside, in the basement, crawlspace or...
Are you using a Cable box, Fiber Optic box or Satellite box? That would be an issue with your satellite/cable/fiber provider.

Even if it is a direct connection and you use a CableCard. That would be a signal issue from your provider. Although you may have to play phone tag between Phillips and your cable provider.

You may need a signal booster. This is what I use. If you have cable internet you'll want want like this with a modem bypass. If you have multiple TVs you probably could use a booster. Your cable provider will install one but you'd have to pay a support call. Which may be best as the wiring can be a pain. Wherever your cable lines are split is where has to be installed. Usually this is outside, in the basement, crawlspace or utility room.
https://www.amazon.com/PCT-Bi-Directional-Splitter-Amplifier-Telephone/dp/B003UH9R2C/ref=sr_1_3?s=electronics&ie=UTF8&qid=1496841801&sr=1-3&keywords=cable+signal+booster+8+modem

At any rate. This is an equipment issue and can only be resolved by calling your cable/satellite provider. Since they have to run diagnostics to see if it is a problem on their end, an equipment issue or if a tech has to be dispatched.
 
Solution