G580 BIOS battery replacement no start

Status
Not open for further replies.

Andrew_281

Prominent
Apr 12, 2017
3
0
520
G580 after replacing BIOS battery laptop not starting. Webcam LED on, power LED on, I can hear HDD and fan. But black screen only. After 4-5 minutes laptop just turns off. Need help!
 
Solution
Solution: I installed a new (another) BIOS, using USB flash with BIOS and fn+r keys combination. 5 minutes deal. Now I have access. Also, old BIOS password and settings still there - good!
If you can hear things running inside, then it is actually on. Just your display isn't.. I suggest you try this...


1. Turn the laptop off (not sleep or hibernate but off).
2. Connect an external monitor to the laptop.
3. Turn on the external monitor.
4. Turn on the laptop.

NOTE: You may have to press an "external monitor" button. Could be the f4 button or a button with two monitors on it, for the external monitor to work.

If you can see fine on the external monitor, then your attached display, or the ribbon cable that connects it, are your problem.

If you can't see on the external monitor at all, or the problem occurs on the external monitor as well, then it is probably the graphics card/GPU that is the problem, which may require the motherboard be replaced.
 

Andrew_281

Prominent
Apr 12, 2017
3
0
520
Solution: I installed a new (another) BIOS, using USB flash with BIOS and fn+r keys combination. 5 minutes deal. Now I have access. Also, old BIOS password and settings still there - good!
 
Solution
May 15, 2018
1
0
10


Could you give detailed instructions how you did it?

 
Status
Not open for further replies.