HP x360 Convertible will not power on, no lights or anything. Battery is, or should be, fully charged, but get no activity when power button is pressed. Now gets hot spot on bottom near power input port when plugged in. Was running Windows 10 and doing well. Only a little over a year old. Any help???
HP Pavillion x360 won't turn on.
- Thread starter Hank G
- Start date
-
- Tags
- Hewlett Packard Power
Solution
webworkings
Titan
- Apr 6, 2016
- 25,136
- 261
- 113,340
Try the following and see if it will turn on...
1. First make sure the device has been charged.
2. Unplug your charger cord.
3. Remove the battery.
4. Press and hold the "Power" button for 30 seconds.
5. Now plug back in the power/charger cord.
6. Now put the battery back in.
If this doesn't help, then test the power cord to see if it is good. Either try your cord in another device, or try another devices cord in your laptop.
Should that not be the problem, then check the battery to see if it needs replacing.
1. First make sure the device has been charged.
2. Unplug your charger cord.
3. Remove the battery.
4. Press and hold the "Power" button for 30 seconds.
5. Now plug back in the power/charger cord.
6. Now put the battery back in.
If this doesn't help, then test the power cord to see if it is good. Either try your cord in another device, or try another devices cord in your laptop.
Should that not be the problem, then check the battery to see if it needs replacing.
Similar threads
- Question
- Locked
- Question
Facebook
Twitter