My Dell Laptop is bricked from a Bios upgrade SOLVED

Ali_179 · Nov 1, 2016

Model: Dell Insprion 15(R) 5537

Hello, so i was asked to upgrade my
Bios from A07 to A08 so i turned off other programms and installed it while in the middle of it my laptop restarded and i dont know why the hell it happened and now when i turn on my laptop it shows the dell logo and then goes to a complete black screen that if i move my mouse i can see the cursor with a loading logo of windows,
What i have tried: i tried holding power on button for 15 sec with end button and then dell logo came with also at the bottom corner saying F2 for options and F12 for boot options
but when i click both of them it still dosent work,and nothing happens Help plz

Ironsounds · Nov 1, 2016

Hello... 1) I would try and clear the CMOS and see if that helps B /

2) You can make bootable media and do a MB flash Utility that way... but your support site doesn't show the option... I would contact them and see if they have a non-windows ( DOS ) version install for you... that would be my next step B /

Shaun o · Nov 1, 2016

The bios update may of completed successfully Ali.

But by installing a new bios update or a firmware revision to the laptop Ali.
It will set all of the settings of the laptops bios back to default settings Ali.

It means you will have to enter the bios.
And for the Hard drive interface mode re select Ahci mode.
Then for the boot order of devices make sure that the HD or SSD drive of the laptop is set to number 1 in the boot order list ok.

Save the changes you have made in the bios before you exit it.
You may also have to set the real time clock in the bios to the correct time, and also the day, month and year Ali.
So make sure you check if it needs changing or is correct.

If windows does not load or Ali.

It begins to load, and then stops mid way in loading then it is because the wrong mode for the hard disk or ssd of the laptop is set wrong as said.

You have three modes to choose from for the sata ports of the laptop.

IDE, Ahci, Sata, and may also have a Raid mode option.
But set the Sata interface type, mode to Ahci as the selection as said and make sure you save the changes before you exit the bios.

You should then be able to load windows up to the login screen, or reach the windows desktop Ali without any problems ok..

Every fresh bios install, upgrade, or upgrade of the bios firmware will always revert the bios back to its factory default settings where the wong mode is set fo the sata interface for hard drives, and the boot order is reset.
And why you need to make sure the boot drive is set to number 1 in the boot order list of the bios Ali.

If the laptop was bricked Ali then you would not even see the Dell logo splash screen showing when you turned you laptop on, and it would not even attempt to load windows at all.

It is just the fact that the wrong type of mode is selected for the Sata interface in your bios due to a factory reset of the bios after the bios update.

Hope it helped

Ali_179 · Nov 1, 2016

Ironsounds :

Tnx For your answer, But can u tell me how can i Clear the CMOS ? i dont know much about hardware and software,
as i said i cant even get to the setting at the dell logo by clicking f2 or f12, so what should i do ?

Ali_179 · Nov 1, 2016

Shaun o :

The bios update may of completed successfully Ali.

But by installing a new bios update or a firmware revision to the laptop Ali.
It will set all of the settings of the laptops bios back to default settings Ali.

It means you will have to enter the bios.
And for the Hard drive interface mode re select Ahci mode.
Then for the boot order of devices make sure that the HD or SSD drive of the laptop is set to number 1 in the boot order list ok.

Save the changes you have made in the bios before you exit it.
You may also have to set the real time clock in the bios to the correct time, and also the day, month and year Ali.
So make sure you check if it needs changing or is correct.

If windows does not load or Ali.

It begins to load, and then stops mid way in loading then it is because the wrong mode for the hard disk or ssd of the laptop is set wrong as said.

You have three modes to choose from for the sata ports of the laptop.

IDE, Ahci, Sata, and may also have a Raid mode option.
But set the Sata interface type, mode to Ahci as the selection as said and make sure you save the changes before you exit the bios.

You should then be able to load windows up to the login screen, or reach the windows desktop Ali without any problems ok..

Every fresh bios install, upgrade, or upgrade of the bios firmware will always revert the bios back to its factory default settings where the wong mode is set fo the sata interface for hard drives, and the boot order is reset.
And why you need to make sure the boot drive is set to number 1 in the boot order list of the bios Ali.

If the laptop was bricked Ali then you would not even see the Dell logo splash screen showing when you turned you laptop on, and it would not even attempt to load windows at all.

It is just the fact that the wrong type of mode is selected for the Sata interface in your bios due to a factory reset of the bios after the bios update.

Hope it helped

dear guy thanks for your response but i really dont understand a thing of what you said, can u PLEASE put a step by step to do? like action wise what should i do? i cant use the f2 or f12 buttons to get into any setting i dont even know where to start? please , tnx again

Ironsounds · Nov 1, 2016

Hello... Yes... not being able to get into your BIO's OR to check any settings... but it is not a total "bricked" system... so I suggest the CMOs Clear next.

Take your time here and be slow and careful to your MB... look in your MB manual/Pdf for pictures and location of the SW/pins. B )
1) un-plug PS from wall.
2) remove MB battery
3) place jumper pins OR push switch on MB to clear the capacitors... for ~2 mins
4) remove Jumper/switch connection.
5) re-install battery
6) plug monitor into the MB or video card output. (if you have a MB/CPU GPU, it will default to them, after a CMOS clear)
7) plug in PS to wall
8) Boot computer.

Search

My Dell Laptop is bricked from a Bios upgrade SOLVED

Ali_179

Commendable

Ironsounds

Ironsounds

Distinguished

Shaun o

Distinguished

Ali_179

Commendable

Ali_179

Commendable

Ironsounds

Distinguished

Similar threads

TRENDING THREADS

Moderators online

Share this page