Lenovo y50 failed to boot up

EmirDurak

Commendable
Oct 14, 2016
1
0
1,510
Hello everyone out there!

I've got this problem with my lenovo y50.
I bought it a year ago, in October, around there.
So the problem is that when i boot up, i get this error
Efi Network 0 ipv4 <some numbers> boot failed
and then the same just with ipv6. Sometimes with luck i can get the pc turned on. But when i do, my programs start to crashing some times. Like just all of them.
So i choose to post the problem here, because usually i get the most of the answers to my other problems. But with no luck i couldn't find a answer here :(
So here is my specs to my pc
Nvidia Geforce GTX 960m
Intel i7 4720HQ 2.60 Ghz
8gb ram
And the others i dont know lol.
 
Solution
It seems like the HDD is being bypassed and the laptop is booting directly to the network.

try to:

1. Boot into the BIOS (press Fn+F2 on power-up) and check if the HDD is getting detected on the Information Tab.

2. If the HDD is detected, navigate to the Boot Tab and ensure it's the first boot. If it still fails, try to disable UEFI and press F10 to save and exit

If the HDD is not detected, you may need to contact lenovo for service ( if it is still under warranty ) as there's most likely a defect on the HDD.
It seems like the HDD is being bypassed and the laptop is booting directly to the network.

try to:

1. Boot into the BIOS (press Fn+F2 on power-up) and check if the HDD is getting detected on the Information Tab.

2. If the HDD is detected, navigate to the Boot Tab and ensure it's the first boot. If it still fails, try to disable UEFI and press F10 to save and exit

If the HDD is not detected, you may need to contact lenovo for service ( if it is still under warranty ) as there's most likely a defect on the HDD.
 
Solution