broken laptop monitor, laptop stuck in safe mode, I just wanna go back to normal mode and get it working on tv again

Ala_2_

Commendable
Aug 20, 2016
1
0
1,510
My screen is broken ,so ive been using an extarnal monitor to use my laptop , recently i got into safe mode by going in system configuration and ticking safe mode ,however i discovered safe mode doesn't work on my tv monitor since then I've been trying to find a way to get out of safe mode or go back to normal mode , ANYTHING TO ALLOW ME TO START USING MY TV MONITOR TO SEE . please help and thank you so much for your help
 
Solution
If you have a friend with a conventional PC monitor, take it there and connect it to that screen. It should display properly albeit with a black screen instead of your normal Desktop.

Press the Windows key and R together then in the Run box, type
msconfig
then press Enter. Under the BOOT.INI tab, remove the tick from the /SAFEBOOT box. Click Apply then OK your way out and restart the machine.

If you can see your familiar Desktop, take it home and check it works on your TV screen.
If you have a friend with a conventional PC monitor, take it there and connect it to that screen. It should display properly albeit with a black screen instead of your normal Desktop.

Press the Windows key and R together then in the Run box, type
msconfig
then press Enter. Under the BOOT.INI tab, remove the tick from the /SAFEBOOT box. Click Apply then OK your way out and restart the machine.

If you can see your familiar Desktop, take it home and check it works on your TV screen.
 
Solution

Hamidiram697

Prominent
Apr 14, 2017
2
0
510
I have a laptop screen that is broken and I have recently went into safe mode because of all the malware on it. I waited an entire day for it to load on the external monitor but nothing came up so I shut down the computer manually by holding the power button. I turned it on and I waited for a good 30 minutes for everything to load and nothing came up on the external monitor.

I am using a Dell inspirion.
I use a HP monitor as an external source.
I use a HDMI via VGA cable.


I really need help with this. Please help me..
 
When you connect a laptop to an external monitor, you need to press one of theFunction keys - one of the two with a monitor icon on them. One switches display to the external and the other brings it back.

It's just possiblke something was going on all that time but you couldn't see so try that and see what shows up on the screen.