Asus Tablet T100h bricked during OS install?

no84by

Commendable
Aug 1, 2016
1
0
1,510
I recently attempted to install in parallel Remix OS 3.0.101 64bits with Windows 10 on a Asus Tablet T100h (Intel atom). Everything worked fine during HDD installation (separate 30GB fat32 partition) , rebooted into Remix Os and the device screen went black after showing formatting data partition. <br />
<br />
I tried everything possible to restart the tablet (including tearing it apart and manually disconnect the battery). Nothing worked. The current state is: fully charged, when long press power button the led blink three times amber and six times white. The camera led remains off. <br />
<br />
Any idea for unbricking highly appreciated.
 
Solution
Try the following and see if it will turn on. (I mention it because it is often related to the colors and number of blinks of the lights you mentioned).

1. First make sure the device has been charged.
2. Unplug your charger cord.
3. Remove the battery.
4. Press and hold the "Power" button for 30 seconds and see if the device will turn on.
5. If it does, great, now plug back in the power/charger cord. (If it didn't turn on without the cord in, it should turn on once you it is in.)
6. Now put the battery back in.

Try the following and see if it will turn on. (I mention it because it is often related to the colors and number of blinks of the lights you mentioned).

1. First make sure the device has been charged.
2. Unplug your charger cord.
3. Remove the battery.
4. Press and hold the "Power" button for 30 seconds and see if the device will turn on.
5. If it does, great, now plug back in the power/charger cord. (If it didn't turn on without the cord in, it should turn on once you it is in.)
6. Now put the battery back in.

 
Solution