Windows 8.1-Windows 10 dual boot

Solution
Okay. This will be a little bit complicated. But try it. It may just work out. I hope you have no data in the HDD there.

Enter system installing interface by using Win 10 USB hard drive boot. and then press “Shift”+”F10” to open the command prompt.

Type “Diskpart” (do not input quotation mark os any of the suggested commands), and then press “Enter” key to enter operating interface.

Then type “list disk”: to check hard disk properties. Pay more attention to capacity of hard disk to select. Usually, disk 0 is hard disk, and disk 1 is the usb drive where wins 10 is in.

Type “select disk 0”: to select disk 0 as the disk that is operating System needs to be installed in. In your case, you need to note down which is the drive you want...

senseijtitus

Estimable
Apr 13, 2015
50
0
4,610
Seems like a problem with the Image file you downloaded.

Try another fresh copy. There are tonnes of Windows 10 copies available in torrents. You can download one of them and make a botable usb using Rufus tool and try with that.
 

USAFRet

Illustrious
Moderator


At this late date, why are you wanting to install Win 10? You'll have to undo it pretty soon.
 

senseijtitus

Estimable
Apr 13, 2015
50
0
4,610
Well torrent ISO files are pretty much used ones and are therefore pretty solid. When you download directly from the MS Website, there is always a chance that if there is some connection issue in the Internet, downloaded files could be corrupted and you will not know until you try to install it. It had happened to me many times.
 

Nikos K

Estimable
Nov 12, 2014
12
0
4,570


I don't know!I had Win10 downloaded for a long time,but I hadn't installed it yet,I just woke up and wanted to install it. :D
 

senseijtitus

Estimable
Apr 13, 2015
50
0
4,610
Okay. This will be a little bit complicated. But try it. It may just work out. I hope you have no data in the HDD there.

Enter system installing interface by using Win 10 USB hard drive boot. and then press “Shift”+”F10” to open the command prompt.

Type “Diskpart” (do not input quotation mark os any of the suggested commands), and then press “Enter” key to enter operating interface.

Then type “list disk”: to check hard disk properties. Pay more attention to capacity of hard disk to select. Usually, disk 0 is hard disk, and disk 1 is the usb drive where wins 10 is in.

Type “select disk 0”: to select disk 0 as the disk that is operating System needs to be installed in. In your case, you need to note down which is the drive you want to install it in.

Type “clean”: to clean up current hard disk’s partition.(This is basically formatting the HDD.

Then after the previous command finishes execution, type “convert mbr”: to convert GPT into MBR.

type “create partition primary size = xxx”: to create the size of primary partition.(enter the needed size for each partition like this.

Type “format fs = ntfs quickly”: to format disk to NTFS quickly.

Now type “exit”: to finish operating.

Input “exit”: to shut down the command prompt.


Now you will need to refresh the partition table if the new partitions are not showing up.

Then try to install the OS.

Keep us informed.
 
Solution

Nikos K

Estimable
Nov 12, 2014
12
0
4,570
I need the full version of the program to do a GPT to MBR conversion.Never mind,I won't install Win10.Anyway,I would have installed it only to see how it is.Thanks for your help