receiver connection problem

wsoto

Estimable
Sep 1, 2014
2
0
4,510
I need to know if there is a solution to my problem. during the construction of my house I ran all of my speaker wires through the house all 14/ 2. the problem is that the wires the should go from the volume control to the receiver should had been a 14/ 4. I noticed the problem a few months later. I cannot pull the wires as all of the holes were sealed by the builder to prevent fire flash. any way to do a wireless remote?
 
Solution
If you only have two conductors going into each room then you don't have a stereo signal for the speaker pairs. No remote can help you with this. You could place a Sonos ConnectAmp where the 14/2 wire from each speaker can be accessed. This will give you stereo and full control with smartphone, tablet, or computer. No home runs needed with Sonos.
If you only have two conductors going into each room then you don't have a stereo signal for the speaker pairs. No remote can help you with this. You could place a Sonos ConnectAmp where the 14/2 wire from each speaker can be accessed. This will give you stereo and full control with smartphone, tablet, or computer. No home runs needed with Sonos.
 
Solution