Pioneer Model SX-217-K receiver
- Thread starter dgarrowsr
- Start date
Solution
americanaudiophile
Titan
- Aug 27, 2008
- 14,933
- 146
- 103,240
Not sure what you mean by "Samsung Sony Philip" digital interface but if you have an Toslink optical or coax digital connection you can get surround sound if you set the output to Dolby Digital on what ever is feeding the Pioneer. Usually on a TV you get a choice of PCM or Dolby Digital.
I'm illiterate when it comes to electronics. I have a toslink opitical cable running from the TV to the receiver & the TV is set for PCM ( The TV won't allow me to go to Dolby Digital) On the e-manual they talk about SPDIF (Sony Philips Digital Interface) Do I have to have any cables other than the optical to make surround sound work?
- Jul 4, 2010
- 350
- 0
- 19,310
make sure your receiver is set to optical digital input. I would try the coax rather than optical, optical cables are easily damaged. You can just use a standart RCA cable (any of the standard red/white/yellow audio/video cables) as a coax digital cable.
americanaudiophile
Titan
- Aug 27, 2008
- 14,933
- 146
- 103,240
Many receivers require you to assign a rear panel connection to an input (such digital 1 to TV),
Usually there is an input set up menu to do this. In older receivers there is a front panel switch.
Usually there is an input set up menu to do this. In older receivers there is a front panel switch.
- Jul 4, 2010
- 350
- 0
- 19,310
i have a pioneer receiver and the digital is allocated to "TV" and digital 2 to "sat". You should be able to change this in the setup menu. Read your user manual.
By switching my receiver to CD the surround sound works, apparently the optical digital output must be tied that. The bottom line is it's working. Thank you all for bearing with me. This is the best site for solving issues that I have found.
Facebook
Twitter