Sign in with
Sign up | Sign in
Your question

can i run a 1000 watt amp with a 1500 watt peak sub

Tags:
  • Peak
  • Home Theatre
Last response: in Streaming Video & TVs
Share
May 16, 2014 9:56:44 AM

I'm buying a blue Pyle 15 in sub. It peaks at 1500 watt. What watt amp should I buy?

More about : run 1000 watt amp 1500 watt peak

May 16, 2014 10:00:37 AM

Jcuff121 said:
I'm buying a blue Pyle 15 in sub. It peaks at 1500 watt. What watt amp should I buy?


Sure, 1500W would work fine with a 1000W amp. However, many amps do not themselves drive the sub. They will have a coaxial out, with a pre-amp. You then need a separate sub amp.
m
1
l
May 16, 2014 10:53:57 AM

Rather than matching the peak wattage of any amplifier to a speaker, you more want to match the RMS output of the amp to the RMS input of the sub. Peak wattage is such a grey area since more efficient amps can often drive their peak output longer while lower efficiency units will heat up much more quickly and drop output faster.

RMS ratings are given for what the hardware can safely run at for an indefinite amount of time given proper cooling.
m
0
l
May 16, 2014 11:01:32 AM

dwatterworth said:
Rather than matching the peak wattage of any amplifier to a speaker, you more want to match the RMS output of the amp to the RMS input of the sub. Peak wattage is such a grey area since more efficient amps can often drive their peak output longer while lower efficiency units will heat up much more quickly and drop output faster.

RMS ratings are given for what the hardware can safely run at for an indefinite amount of time given proper cooling.


Right. Don't match peak wattage, pretty much ever. If you do, you run the risk of blowing a speaker because they don't like sustaining that max for long. Also, don't go too far below the RMS, or you're stuck running your amp up high all of the time to get good frequency response. For instance, I can run my 80W per channel Technics Studio Series (not made since the 1970's) rack amp set with a pair of 150W peak speakers just fine, but they sound way better at quarter volume or higher. However, the amp/preamp makes some heat. I do know it can run at 100% for extended periods due to DJing stuff, but generally not a good idea to run 100%.
m
0
l
Tom’s guide in the world
  • Germany
  • France
  • Italy
  • Ireland
  • UK
Follow Tom’s guide
Subscribe to our newsletter
  • add to twitter
  • add to facebook
  • ajouter un flux RSS