I recently got a AMD A10 5800k with integrated graphics. So what I did is i took out my graphics card and put in my CPU and it

TT-TTT

Honorable
Dec 12, 2013
2
0
10,510
II recently got a AMD A10 5800k with integrated graphics. So what I did is i took out my graphics card and put in my CPU in. but no display. So I put my card back in and it started up fine. So i did research and i found out you have to switch to Integrated Graphics so I went into my bios to switch but would not let me switch! any solutions?? I have a MSI FM2 motherboard.
 
Solution
it should be under primany display output. the default is auto. then it ipgpu/peg/pci. with the gpu pulled the onboard video should come on. if the cpu chip not damaged and seated right. with the rig working now make sure all the drivers are installed and see if the on board video port is working. you may have to in the bios turn on muilt monitor support to turn mack on the ipgpu.
it should be under primany display output. the default is auto. then it ipgpu/peg/pci. with the gpu pulled the onboard video should come on. if the cpu chip not damaged and seated right. with the rig working now make sure all the drivers are installed and see if the on board video port is working. you may have to in the bios turn on muilt monitor support to turn mack on the ipgpu.
 
Solution

Saif Seofe

Honorable
Dec 7, 2013
2
0
10,510
Now you have two cards the one on the cpu and the one you just purchased what you have to do is go to you'r desktop and right click ,Display there should be 3 option's choice the third one that will use both the cpu graphic and the video card you purchased .