Tv with no audio output. Help

Jen76

Honorable
Dec 7, 2013
5
0
10,510
I have the same problem. I bought a Samsung 65" with no output and a sound bar. If I buy a 4 x 1 hdmi switch like you are talking about and hook it up to me tv how will I be able to hook up the wii? I know the sound bar and blue ray hook up to the switch but not sure how to do the wii. Thanks for any help you can give me!
 

gregates

Honorable
Oct 3, 2013
78
1
10,610
Jen, We do not have a Wii. But looking up the specs it sounds like the Wii does NOT have an HDMI output to hook into an HDMI input (be it on a TV or the HDMI switch box I mentioned above). BUT IF the Wii HAS an HDMI output, you are set to go to the HDMI switcher box.

If there is no HDMI output from the Wii, I found a Wii/HDMI adapter (and I am sure there are more than this one I found) that takes your regular Wii output cable and turns it into an HDMI cable.

Here is a link to the Wii to HDMI (1080p) adapter/converter I found:
http://www.amazon.com/Nintendo-Converter-Output-Upscaling-Adapter/dp/B007TS8ZVC/ref=sr_1_2?ie=UTF8&qid=1386621720&sr=8-2&keywords=wii+cable+to+hdmi

By using the above mentioned Wii/HDMI adapter, you could hook your Wii directly into the HDMI switch box I recommended above. That would mean your Blue Ray, your cable box, your Wii (using the adapter) would hook directly into the HDMI switcher box, THEN from the HDMI switcher box FIRST directly to your Samsung TV with an HDMI cable and secondly, directly to your good sound system. Remember you can hook up to your sound system via any one of three choices of cables. (either a Digital Coax cable, a Digital Optical cable or the older Analog red/white RCA cables.). Choose one of the two "Digital" options if you can from the HDMI switcher box into your sound system, for much better sound quality versus older analog. I like the Digital Coax myself.

Just turn down/off the TV's internal speakers (don't use them) and use your nice sound system instead for all your TV viewing including you Wii.

Let me know if my response makes sense?

Warmest regards

Greg
From Beautiful Oregon

forJenMERGED_zps44133bf5.gif
 

gregates

Honorable
Oct 3, 2013
78
1
10,610
Your Audio Signal Cable Choices
for-tutorial-Audio-Cables70_zps2bf30abd.gif


Digital versus Analog
Digital audio cables are meant to transmit a sophisticated high definition audio signal between your audio source component and a component to "play" the sound into your room. The older analog audio cables did the same thing, but they use TWO wires and the sound is nowhere close to as sophisticated. If you spent money to purchase a high definition component to "play" your sound, if at all possible, you want to use one of the three "digital" cabling choices.

The playing component referred to, could be your stereo speakers, a surround sound system, a home theater amplifier, a sound bar etc,. In short, a more sophisticated sound source to "play" your sound, than just simply using the speakers housed inside your TV.

Coaxial Digital Audio Cables Coaxial digital audio cables have a good "tight" fit to your source sound component and your playing component. Sources say that over distance there is a loss of signal quality. Consult your cable source as to what they say for signal quality versus the length of cable distance. Some sources advertise longer cables constructed for longer distance with no or minimal signal quality loss. If you are less than 15 feet, don't give it a a second of thought, you are fine!!!

Optical Digital Audio Cables Optical digital audio cables transmit your sophisticated digital audio signal just like Coaxial (above), but can do it over much greater distances than Coaxial, without having to boost the signal. So if your components are 20 feet apart, use Optical. But, there are limitations. Optical cables use light to transmit the signal. So if you have tight bends in your path from one component to the other, Optical might not be the answer.

Analog Audio Cables Analog audio cables, commonly known as RCA, stereo, or composite audio cables. Prior to the high definition and digital world, we all used these for hooking up our stereo components. Basically color coded one red and one white for a two channel "left" and "right" audio connection (if there is a "third" cable for an analog video signal, it is usually color coded yellow).

High Definition Multimedia Interface Cables Referred to commonly as HDMI cables, this is always your best choice. Remember, the three other choices presented here, ONLY transmit your AUDIO signal from component to component. There ALWAYS has to be a third cable transmitting the VIDEO signal component to component with the other three choices. Example, if you use a Coaxial Digital Audio Cable from your DVD to your high definition TV, you STILL need to run a separate video cable from the DVD to the TV as well. BUT running an HDMI cable from your DVD to the TV transmits a digital signal of BOTH video and audio. You use one cable instead of two. Both the video and the audio signals are digital.


Why I had to use the HDMI switcher box
In my case, I needed to send two SEPARATE signals from my source components (cable box, DVD, Xbox) to [1] first a video from my source component to the TV and [2] second an audio signal from my source component to my separate sound system (in my case my BOSE Solo).

Bottom-line, IF your TV HAS an "Audio Out" plug for any of the above audio cables, use that to go to your separate audio component. Otherwise, my solution detailed above works absolutely great.

Enjoy!