Just assembled laptop, now im stuck

smorizio

Splendid

Jan 22, 2010

1,154

0

21,410

• Nov 10, 2013

• #2

does the funtion key and f6 the one with the monitor turn on the ext monitor port for you??

 

Upvote 0 Downvote

S

Selica

Honorable

Nov 10, 2013

8

0

10,510

• Nov 10, 2013

• #3

I know what you're talking about. Well, I haven't tried it but I doubt it'll work. I usually can't change that until I go into windows I think

 

Upvote 0 Downvote

smorizio

Splendid

Jan 22, 2010

1,154

0

21,410

• Nov 10, 2013

• #4

if you can get into windows most vendor give you third party software to change the bios. you want change it so both video ports are on at start up.

 

Upvote 0 Downvote

S

Selica

Honorable

Nov 10, 2013

8

0

10,510

• Nov 10, 2013

• #5

Well that's the thing, I can't get into windows. I would try pressing all sorts of buttons but I'm,scared if they were going to asking me to format something.

 

Upvote 0 Downvote

J

jarotech

Dignified

Oct 13, 2012

3,296

3

16,810

• Nov 10, 2013

• #6

Hi Selica, when you boot the laptop, close the lid right away, it's supposed using the external monitor as the default screen.

 

Upvote 0 Downvote

S

Selica

Honorable

Nov 10, 2013

8

0

10,510

• Nov 10, 2013

• #7

Tried, got nothing. Using vga cable.pc is hdx18. If there is a set of instructions that I could do in this situation I think that would be the best option. But idk, I'm not the expert.

 

Upvote 0 Downvote

S

Selica

Honorable

Nov 10, 2013

8

0

10,510

• Nov 10, 2013

• #8

Tried, got nothing. Using vga cable.pc is hdx18. If there is a set of instructions that I could do in this situation I think that would be the best option. But idk, I'm not the expert.

 

Upvote 0 Downvote

J

jarotech

Dignified

Oct 13, 2012

3,296

3

16,810

• Nov 10, 2013

• #9

When you said you reassembled your laptop, how far did you disassemble the laptop, and what is the problem with the screen.

 

Upvote 0 Downvote

S

Selica

Honorable

Nov 10, 2013

8

0

10,510

• Nov 10, 2013

• #10

I basically took it all apart, cleaning the fan and all. The screen has been like that for almost 2 years. I'm pretty sure I just need a new inverter for that but I plan on buying a new laptop soon so I don't want to,spend anymore money on this one. Thing is, I need the data from the PC so it still,needs to be working by then. This is not good.....

 

Upvote 0 Downvote

J

jarotech

Dignified

Oct 13, 2012

3,296

3

16,810

• Nov 10, 2013

• #11

Another thing you can try, hold the windows key and tap two times the P key, this should duplicate the screen.

 

Upvote 0 Downvote

S

Selica

Honorable

Nov 10, 2013

8

0

10,510

• Nov 10, 2013

• #12

Nothing, sounds familiar to,the function key thing.

 

Upvote 0 Downvote

J

jarotech

Dignified

Oct 13, 2012

3,296

3

16,810

• Nov 10, 2013
• Solution

• #13

The only thing I can say is to verify the cable for the VGA output and the RAM if they are seated correctly. You could remove the HDD and power up without it, you will have a warning that you have no OS, but you will see something on the screen.

 

Upvote 0 Downvote

Solution

S

Selica

Honorable

Nov 10, 2013

8

0

10,510

• Nov 11, 2013

• #14

Hey jarotech, to be honest I was a bit scared doing anything with with hard drives but when I was checking the ram I noticed the hdd was loose so I fixed that. Looking on another site I was able to find out how to get the external,monitor working. By unplugging the screen cable, It turned the monitor to its default screen. Thank you for taking the time to help me out tho. Really appreciate it.

 

Upvote 0 Downvote

J

jarotech

Dignified

Oct 13, 2012

3,296

3

16,810

• Nov 11, 2013

• #15

Hi Selica, glad to help you.

 

Upvote 0 Downvote